Ricoh sc 672 error on new machine
Try checking or changing the thermistors!
- Go to this code with "Clear Mode"+107+"Clear/Stop" hold for 5s.
- Go to System Settings
- Go to 5875
- Check the setting of SP5875-001. If the setting is set to "1 (OFF)",change it to "0 (OFF)".
The metal contact spring on the thermistor broken causing all sorts of 'unrelated errors including 'Please Wait' sc 670 and sc 402...
Ricoh Aficio 450...
2 days ago
Ricoh 3110 error 28113
press the orange key threee times and enter 107 and then press and hold the stop key for about five seconds.
the machine then takes you into the sysytem. select sp mode on the screen. put off the machine for a minute and put on again
on Jun 13, 2019
What wil the problem be if my mpc 2051 gives a SC 531 code
Ventilation fan: rear error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
• Defective ventilation fan: front or rear • Disconnected or defective harness • Defective DRB • Defective BCU
1. Check or replace the harness. 2. Replace the ventilation fan: front (SC530) or rear (SC531). 3. Replace the DRB. 4. Replace the BCU.
on Jun 11, 2019
Not finding what you are looking for?