Relic Watches - Recent Questions, Troubleshooting & Support
How do I remove the crown on my RELIC ZR15409 watch?
is this an mechanical watch? all the same open the back and look closely at the area near the crown stem. pull the crown out and see if any little levers move. If they do there may be a little indent on the lever. with the crown in press the indent with a needle and pull the crown our. the also may be a little arrow on the back of the movement pointing at a hole. press a pin in the hole and remove the crown.
on Jan 09, 2018
Battery size for relic watch. On the back it says ZR11586 then *300210.
Christopher, Neither of these is a battery number. Open the watch and remove the battery. (Gently.) Copy the number(s) on the battery, using a magnifying lens if necessary.
Log onto eBay and search for "[the number] battery". Example: AG10 battery. I've never found one yet that was not available. And they are quite inexpensive--I usually buy more than one.
on Apr 03, 2017
Battery for relic wet or 15478 and how to remove back of watch
Watch back will almost certainly need a dedicated wrench to loosen and unscrew it. Sometimes considerable force is needed and in that case a watch repairer would remove the strap and fit the watch into a bench-mounted holder.
Once the back has been disturbed the water resistance cannot be guaranteed unless it is pressure tested after refitting.
on Jan 23, 2017
Not finding what you are looking for?