Red Motorsports - Recent Questions, Troubleshooting & Support

When a municipality has a Water Main break the work that follows introduces so much debris into the adjacent lines that most filters are coated, overwhelmed and can't stop the sludge that is being forced through them and you will find the harder compounds, ie: calcium deposits, concrete particles & actual rock debris, although microscopic in size, in the water control solenoids of the new appliances we have today. It only takes one tiny little hard particle to jam the plunger in a solenoid and stop it from opening or closing. I feel confident in saying that your machine is not damaged but the clean-out of it may require a Technician that the City is Libel for paying, to fix your machine if the task is too complicated for your skill level. As with any new machine, cut all power to it and let it rest for ten minuets before powering back up to allow it to run it's own diagnostic troubleshooting program. It might give you a Fault code that will tell you exactly what's wrong and it could even clear the fault itself. I hope that helps.

Red Defy Helmet... | Answered on Mar 26, 2018

Sounds like main wash switch is bad for wash cycle.

Red Defy Helmet... | Answered on Feb 04, 2018

you mite need to replace your thermostat,...... the alarm button is
telling u that your fridge is not cold enough, there is also probably another prob but u need to b a electrician to sort it on the top of fridge there is a panel,.. under that there is a fusible link if one blows it will need to b replaced its soldered in no job for u unless ur a electrician hope this helps

Red Defy Helmet... | Answered on Aug 14, 2016

probably can if they are available from the service agent parts
if not consider using stockings cut to size in their place

Red Defy Helmet... | Answered on Jul 14, 2015

trace the wires from the old one note down and do the same for the new one,

Red Defy Helmet... | Answered on Feb 09, 2014

Locate the temperature sensor,clear everything away from sensor.

Red Defy Helmet... | Answered on Jan 18, 2014

I had a similar problem with my dishwasher so what I did (depending on your model) was reset it the by pressing the reset buttons on the front panel. Once I did this, it defaulted back to the start of the wash cycle and worked fine.

Red Defy Helmet... | Answered on Dec 31, 2013

this is an appiance.. not a vehicle, folks whos putting these in catagory...

Red Defy Helmet... | Answered on Dec 31, 2013

wrong forum , this is, cars/trucks. sorry.
ah, snow boarding, what makes you think htere is a manual
put on head, adjust strap, if dirty clean with mild soap and water.

Red Defy Helmet... | Answered on Nov 26, 2013

Not finding what you are looking for?
Red Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Top Red Motorsports Experts

x-ray man

Level 2 Expert

43 Answers

Bill Boyd

Level 3 Expert

53733 Answers

Trp Nap
Trp Nap

Level 1 Expert

18 Answers

Are you a Red Motorsport Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides