Pelco Televison & Video - Page 2 - Recent Questions, Troubleshooting & Support


did you ever get a solution for this issue?

Pelco DX3100... | Answered on Oct 20, 2010


Where did you find the power supply board replacement? PELCO does not have this part

Pelco PMCP650 50... | Answered on Jun 14, 2010


on the cameras them self there should be a adress and baud rate setting this should be the same as what you have on the software. also the cable that you have going back to your ethernet panel cannot be by any electric lighting or anything like that and check and make sure that the connetors that plug in to the panel have the right color code. you need to look for the straight through wiring diagram 568b. hope this helps.

Pelco DX3100... | Answered on Mar 14, 2010


Its a software problem

Pelco Televison... | Answered on Feb 09, 2010


the default password is 0000 try that.

Pelco DX1000 | Answered on Nov 30, 2009


You need to do a INITIALIZATION/REINITIALIZATION PROCEDURE See below for details Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;}

If you are installing the DVR, follow the steps below to initialize
the unit as part of the installation instructions in the Installation/
Operation Manual. This procedure erases all data on the hard disk
drive and is necessary to ensure that there is no data that could cause
improper operation when you try to use it. With a clean hard drive, the
DVR can correctly index recorded video with the correct time and date.
Once the DVR is initialized, you should not reinitialize the DVR
again unless you are having trouble finding and playing back video,
and there is no other solution. If you have to reinitialize the DVR, make
sure the time and date are correct before beginning the procedure.
WARNING: When you initialize or reinitialize the DVR:
• The hard disk drive is erased.
• The password and all menu settings return to their default
conditions.
To initialize or reinitialize the DVR:
1. Press and hold the Function button. The Function Key List
appears. Keep holding the Function button.
2. Press and release the 0 button, and then release the Function
button. Enter the password if requested. The Setup Menu
appears.
3. Using the front panel buttons, enter 1220.
4. A screen appears and asks if you want to continue. Use the
Search (<</>>) buttons to highlight Yes or No to erase the
hard disk drive, and then press the Play/Pause button.
PASSWORD
The default password is 0000. If you change the password, and
then forget it, you can get into the system by using 2002.

Pelco DX1000 | Answered on Oct 22, 2009


Will not work. the OS is in a partition on the original HDD....you best bet is to send it in for a repair call 1-800-289-9100 24/7 to get a RA #

Pelco DX1000 | Answered on Oct 22, 2009


yes contact service repair at 1-800-289-9100

Pelco DX1000 | Answered on Oct 22, 2009


This DVR dose not support that...You can either see one camera full screen or see all 4 in a quad screen depending on how many cameras you have and how may of them are enabled.
If the Preview feature in the Camera menu is On, you can view live video on the monitor.
Video is displayed full-screen only if one camera is turned on. If more than one camera is
turned on, video is shown in a quad view. Sorry but its not going to be able to do what you are looking for...Pelco didn’t put that feature in their small DVR until the DX4000 series......Good Luck and let me know if this helps,

cbinny1

Pelco DX1000 | Answered on Oct 22, 2009


You can connect it to your PC directly with a cross-over net cable, and you also connect it to your LAN with straight net cable. Type The default address: 192.168.2.108:8004 in your IE after you set your pc address in the same geteway, you will see the user and PW requirement screen. if you can't get this screen,try to reset DVR to default setting. see Page#100 of its manual.

Pelco DX2000... | Answered on Aug 10, 2009


Newer versions of Java does not work on Pelco dx2000. You have to use Microsoft's VM version of Java, which is no longer offered by Microsoft, but you may be able to find it somewhere. current Java (from Sun) needs to be uninstalled. this makes the computer compatible with DX2000, but not the Internet as is it today. Kinda sucks, eh?

Pelco DX2000... | Answered on Jul 22, 2009


yes, on the configuratiion plage, use the schedule to increase the amount of time you want for

1) Sechedule recording
2) motion recording
3) event recording.

Remember, this is all based on the size of your hard drive and the number of camera you have installed.

Pelco DX2000... | Answered on Mar 23, 2009


I have 2 DX2000's, In order for you to communicate with your pc, you need a Crossover cable, if you have a laptop or computers, connect the crossover cable to that, set your ip address on your computer to 192.168.2.108, (Note: since you never configured it, this would be the default setting). If you have the manual this is in there.,

Another method, if you don't have a crossover cable is to set the ip on your computer to 192.168.2.110 Subnet, 255.255.255.0. its a little more funky, the crossover would be easier, once you get in, then go to the configuration page and setup up the IPaddess for the DX2000, the Gateway to your Router and the subnet mask, once you do this, then you're able to get to it on your network, by typing in http://xxx.xxx.xxx.xxx:8004 .

Pelco DX2000... | Answered on Mar 23, 2009


Contact the manufacturer at (800)289-9100 x 2781 for instructions on how to reformat the drive.

Pelco CM9760... | Answered on Dec 31, 2008

Not finding what you are looking for?
Pelco Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top Pelco Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Cindy Wells

Level 3 Expert

5909 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you a Pelco Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...