Pelco Televison & Video - Recent Questions, Troubleshooting & Support


Converting Pelco exported video files
WHAT IS A DVR?
A DVR is a video recording and pl
ayback device that inco
rporates all of the essential capa
bilities of a VCR but adds significan
t advantages. Like
a VCR, video is recorded from one or more cameras and stored for later playback and retrieval; however, in a DVR, video data is
recorded and
stored on a hard disk instead of
magnetic tape.
Storing video in
this manner facilitates
instant, rand
om access to data, as opp
osed to sequential
access inherent to tape-based recording. This means no fast-forwarding or rewinding is necessary to locate the data a user want
s to view or
export. Another key advantage over tape is decreased maintenance. With no need to replace tapes, DVRs with hard disks can be le
ft unattended
for extended periods of time. Since video remains in the digital domain, data is easy to store, transport, and manipulate. Unli
ke analog video
recordings, digital data does not suffer from a loss in quality wh
en copied or moved from device to device. Because DVRs rely o
n hard disks
instead of tape, data storage is virtually unlimited. Video data
can also take advantage of comp
ression technology
to increase
the efficiency of
storage media. Modern DVRs, such as the DX8000, allow users to record, play back, and view live video simultaneously. Keeping d
ata digital
means video can be easily backed up to a variety of storage media.
It also means that alphanumeric
information, such as date, t
ime, and
transaction statistics,
can be synchronously recorded with video.

Pelco Televison... | Answered on Jun 20, 2015


You can also try "Standby Helper"if you have the occasional issue of the projecter going off ..u can created a task in task scheduler that runs with a 30 second delay on startup.

Pelco DX1000 | Answered on Dec 07, 2014


FileASSASSIN from malware antibytes can unlock it..but be carefully as u can delete file..

Pelco DX1000 | Answered on Apr 02, 2014


Log in as admin and format the HDD will remove all recoded video.

Pelco DX2000... | Answered on Jan 08, 2014


To reset the password for the DX7000 follow these steps: Reboot the system During the boot process, before "Starting Windows" message comes up, press the F8 key repeatedly to enter Safe Mode When the boot options menu comes up, select boot to command prompt only If you get the scan disk screen, you've gone too far and have to reboot. At the command prompt "C:\>" type cd windows and press enter. At the prompt C:\WINDOWS>" type edit system.ini and press enter. When the edit screen opens up, scroll down to the line beginning with the word "shell" Insert a semicolon (;) before the word shell = ;shell Save the file, exit, then reboot the system (You may have to hit ALT on the keyboard to get the File menu to come up) Press ALT+F followed by X and select Yes to the save and exit prompt Press CTRL+ALT+DEL to reboot. The system should now boot to a regular desktop, edit the system registry: Click on the Start button Select Run In the Open field, type in REGEDIT, then click on OK Find the password entry and delete the password: Double click on HKEY_CURRENT_USER Double click on SOFTWARE Double click CyberNetic Double click DVR Double click 1.0 On the right-hand side, locate the word Password and double click it Delete the contents of the Value Data field and click OK Close the regedit window Make the system bootable into DX7000 software: Click START Select Run In the Open field, type SYSEDIT then click OK Click on the SYSTEM.INI window within the System Configuration Editor window Locate the SHELL statement and remove the semicolon that was placed there earlier Close the System Configuration Editor window Click OK when it prompts you to save changes made to SYSTEM.INI file Restart the system (Click START > SHUT DOWN > RESTART) Click OK

Pelco DX1000 | Answered on Nov 06, 2013


Use the analog monitor output on the back of the DX1000 and a BNC to RCA converter you can pick up at any local hardware or electronic store

Pelco DX1000 | Answered on Nov 06, 2013


Monitor out put on the back of the DVR.

Pelco DX1000 | Answered on Nov 06, 2013


If all of the 6 DVRs are on the same location (on the same network), and you want to remotely connect (VPN) to that location, you can Endura Enable the DVRs and then VPN to the Primary DVR. (Note that you need to be Endura Certified to use the Endura Enabled feature).
If they're all geographically distributed, you can only VPN into a single unite at a time..

Pelco Video... | Answered on Oct 25, 2012


There is always a fuse inside and if it is blwn, there is something else that has failed. Check the power supply caps also. Common failure.

Pelco PMCL417 17... | Answered on May 02, 2012


Enter the default unlock code from the manual. Somehow someone set child lock on the controls so your inner Akira baby didn't hurt his ears...just go back in having entered 1234 or whatever it is and tell it you're not worried about toddlers as much as you were.

Pelco PMCL532... | Answered on Oct 25, 2011

Not finding what you are looking for?
Pelco Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top Pelco Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

Cindy Wells

Level 3 Expert

5864 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Are you a Pelco Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...