Nortel Recent Questions, Troubleshooting Help & Support

Try Feature 808 before pressing the touchtone digit - it tells the Norstar to send Long Tones to the remote system.

Try here: bcm50.com

BCM 50, maybe? bcm50.com

email me and i will solve your bcm50 problem with forwarding phone info at businessphonecanada dot com

You only need to post once!

Hi there,
Try using 26567*738 as the default password for the 1120E and 1140E IP phones.

here you are...
This could be the problem with your signaling server , have you checked it ??
I think it is losing connectivity of T-Lan Network.

1. Reset the phone by disconnecting and re-connecting power.
2. When the Nortel logo appears, press each of the four soft keys in sequence.
3. If no other configuration changes are required, press OK repeatedly until the “PC
Port? 1-ON 0-0FF” option appears.
4. Press 1 to enable the PC Port or 0 to disable the PC Port.
5. Select OK to confirm the change.
6. Restart the IP Phone.
When the IP Phone is restarted, the firmware sets the PC Port status accordingly

You need to use an AC power supply on the base IP Phone 1140E for the backlight on the Expansion Module to work.

Hello, depending on the status of the call the buttons will change automatically. Be aware that you may not be the initiator of the call so you may not have all the features. I hope this helps. If not you may contact me at: http://www.liveperson.com/nortel-guy