Norcent Technologies Audio Players & Recorders - Recent Questions, Troubleshooting & Support

try to burn a dvd as pal instead of ntsc, it works for me :-)

This is as close as I could come. Same series different model number, but should be the same. Take a look and let me know. Download manual

I have burnt a dvd+r and dvd-rw and they both work in my norcent dp1800 dvd + amplifier

it may not play regular dvds, try burning a dvd in either pal or ntsc mode and it most likely will work

the remote model number is KF-8999A

if you have a pdf viewing program installed then go to this link and read the manual here http://www.google.ca/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&cad=rja&sqi=2&ved=0CC4QFjAA&url=http%3A%2F%2Fec1.images-amazon.com%2Fmedia%2Fi3d%2F01%2FA%2Fman-migrate%2FMANUAL000046484.pdf&ei=2ZB8UczuFeaGjAKW94GYCw&usg=AFQjCNFOVS1Xo1f2Ilm3bMO6rv3XIK0q0Q

You may have to press the 2.1/5.1 button on your remote control just above the stop button

plug a red and white AV cable into your output sound on your television and connect the other end into the aux 1 or 2 on your norcent amplifier and choose the aux 1 or aux 2 button on your remote

your tv is stereo sound so the only way to get surround is to press the 2.1/5.1 button on your norcent remote

check that ur video input on the tv is set correctly. you can do this by turning on ur theater system first , when u get ur sound grab the tv remote and select the tv input button or if u don't have said button try thr tv/video button untill u get a picture. ( this of course a suring that ur video cable is connected ) hope that helps

May need a code search but these work for model LT-2725Code for red ok button 10030Code for grey ok button 0030

You can use any standard FM antenna - even a piece of wire. The AM antenna is internal - it doesn't need an antenna.

Connect audio out jacks from the tv to aux or video audio input of reciever. use optical input if present for best sound quality.

e-mail to [email protected]
I have the system manuel

start confirming that this is working, check for all speaker that its working check spkr wire continuity. power of amplifier is working, volume control is working no no lost connection. power amplifier check for audio response, and the male plug continuity be sure no lost connection on soldered part.