Netopia Recent Questions, Troubleshooting Help & Support

SO YOU MUST KNOW THE PASSWORD OR NO?

CALL YOUR ISP

"Try http://www.fixya.com/support/r11153882-general_routers_reseting"

YES

GO TO THIS LINK

MAKE AN ACCOUNT HERE ARRIS THEN LOOK FOR THE FIRMWARE.

"Try http://www.fixya.com/support/r11153882-general_routers_reseting"

This site has the X64 Vista driver. I know you need W7, but you should be able to install in Vista compatibility mode.

try this website out they have just about every router out there listed Port forwarding the Netopia 2247NWG VGx router

where is my serial number of idm617b6?

Here are some troubleshooting steps that you can do so you can isolate whether the problem is with the router , the modem or your pc. 1. Disable / enable the wireless connectivity in your laptop.2. Restart the laptop. Then check if it is working. If not, go to the next step.3. Restart your modem and router by unplugging the power cord on the back of the devices. Wait for the devices to load, then check if it is working. If not, proceed to the next step.4. Try connecting your laptop to the modem directly by using an ethernet cable. If it did work, the problem is with the router. Its best to call the manufacturer of your wireless router if that's the case. 5. If step 5 still didnt work when you already connected your laptop directly to the modem, the problem is with the modem itself. Call your internet service provider and they'll do troubleshooting steps on their end too. Hope this was helpful! Have a great day.

Timbuktu was founded by the Tuareg Nomads

win or rooter pass?

you can load it from cnet., for more networking accessories ,visit here., http://www.gizga.com/consumer-electronics

Eh..some yes, mostly NO! I am a technician for the company that widely set up these type routers/switches/gateways and the simple problem is that most of these were used during installation by BellSouth which is now technically SBC Doing Business As; AT&T, DBA BellSouth Mississippi, Louisiana, Alabama,ETC. follow this link AT Drivers and Downloads and select your model of the Netopia 3000 series you have and click the firmware link. DO NOT RUN THIS FILE. IT IS A .BIN FILE TO BE USED IN THE ROUTER'S UPDATE FIRMWARE SECTION. Go back into the update firmware menu and instead of choosing the automatic or online feature *previously a BellSouth domain now converted to an AT&T ITservices domain which is why it can't find it) choose the browse or select file option and select the .bin file you saved and that should do it.

It should be a wireless adapter that you plug into a USB port. It's only needed if your computer doesn't have built-in wireless capabilities. If you plug it in and your system asks for a driver it should be on the CD that came with the unit.

router admin password can be different from wireless password. this page should help:http://portforward.com/default_username_password/Netopia.htm good luck

You need to forward these ports on both your router, and computer aswell as firewall you got one of those.

• Port 88 (UDP)
• Port 3074 (UDP and TCP)
• Port 53 (UDP and TCP)
• Port 80 (TCP)

You might aswell need to open 1863 (UDP and TCP) if you want to use video chat for the kinect.Listed ports need to be forwarded when connecting to XBOX Live A more detailed guide to setting it up is available here: http://support.xbox.com/en-us/xbox-360/networking/network-ports-used-xbox-live

I presume that you mean "from a web site" that the web site is hosted somewhere out on the greater internet.... The problem that you are encountering is probably related to NAT (Network address translation). The "In" side of a router, is typically a "private network" there are pre-assigned number groups for these - a common one is in the 192.168.x.x range. Problem is that the "outside" of your Netopia router will be dependent on your ISP< and unless you are paying them extra for a static IP address, is likely to change every time you reboot - or sometimes they bump them every 24 hours. So, first thing is get a dynamic DNS Entry - www.dyndns.org is one supplier - I think you can get one address for free from them, pay for more.. YOu set up something like CMVideo.dynsdns.org on their site, and set up dyndns support in the netopia router... Then you want to open the specific port on your router, to go to the internal IP Address of your camera. (YOu mention Multiple Cameras - depends on the Camera you may have to go for multiple dyndns (one for each...) ).I am a little confused/concerned about the second router "tier" - if you have the Belkin configure as an Access Point only, all good, if you are trying to run it as a router behind a router, it will probably never work - double nat-ting" is a no no with most consumer Routers. Simple solution is to tap from Netopia lan side to Belkin Lan side (rather than Belkin Wan Side)