Mtd Garden - Page 5 - Recent Questions, Troubleshooting & Support

I find no such control as "engage the blades" for this model. There is "blade control" which is a blade brake release and engine run. The blade is in motion any time the engine is in motion, including during start. You hold the blade control lever to start and operate the mower, then release lever to stop engine and blade. Follow all safety precautions. https://www.mtdproducts.com/equipment/OperatorManualDisclaimerView?storeId=10500&catalogId=20500&langId=-1&pdfLink=http%3a%2f%2fmanuals.mtdproducts.com%2fmanuals%2f769-04527.pdf&htmlLink=

i need a diagram showing for a 20hp yardman tractor model number 13AT605G755

https://www.mtdparts.com/en_US/operatorsmanuals I assume you mead deck drive belt.

go to manusls.com

there is a bolt to adjust try sears parts direct.com

ed, be sure there is nothing wrapped around the blades. lower the deck and be sure the belt is around all of the pullys. If the belt comes off one of the pulleys or the pulley on the engine it may feel normal but it wont engage the blades.

Check with Sears parts Direct.com

Replace the wheels worn out keep them greased.

Check with PartsTreeRepairClinic

Maybe belt has come off or linkage has come loose

You can adjust the shifter go to PartsTreeRepairClinic they will have a video

opposite. one is the crank and one is the cam

Parts Tree Repair Clinic will help you may have a video.

Check the adjustment on the gear shift it may have moved like mine did.

What engine? Model and type.

If I was you I would check key way to see if it has sheered off. It is in center of big drive pulley where belt goes on, Just remove nut and slide pulley off to check condition. Best to split snowblower in half. Your snowblower has two main pieces it will be 4 or 6 bolts to separate your machine.

Can you try putting on the choke