My samsung charge won't pair with bluetooth Motorola H730
First thing to do is make sure Bluetooth is on for BOTH devices . Second thing is to make Both devices Visible. Third is to Scan for nearby devices. You will need to know the 'device name' of each phone. When you find the other phone on one device, click on it & it should ask you to 'Pair device'. You should then hear an 'alarm' tone & get a message in a box. (sometimes you need to 'pull-down' this message from the top of the screen, like you do to get the settings or wi-fi status). It will ask you if you want to pair & then give you a 'Pairing code'. This is what you type into the phone. The other phone will then get this & ask if you want to pair. Say yes & the two phones are paired ONE WAY. You need to repeat the process for the phones the other way around, so that the phones are paired in both directions. Remember, every time you get the 'alarm' tone, to check your 'pull-down' to see if the connection code is hidden up there.! Telling it to you is more complicated than actually doing it.!!! Best of luck.
150 views | 0 helpful votes
hit the sound icon on your desktop rightclick it, go to Recoringtools turn down the microphone! As in the picture.
Im sorry its dutch :-)
207 views | 0 helpful votes
New batteries not holding charge
The problem is probably the AC adapter. If you have a voltmeter you can see what voltage is on the adapter output plug going to the base unit. Unplug the small plug from the base unit and measure. Since the batteries are 3.6 v, the power adapter plug needs to be something greater. Maybe 4.5 v. It should say on the AC adapter what it puts out (volts and max current). Usually the center is negative and the outside barrel of the plug is positive. Put the volt meter to 5v DC and put the black lead in the plug center and the red lead to the outside barrel of the small plug. If you measure a negative voltage, switch the leads. Make sure the Volt meter is not in current mode or you will be shorting the adapter at its output plug. If you get a reading larger the 4 volts then the problem is probably inside the base. There should be some circuitry to minimize charging current to the battery,.
65 views | 0 helpful votes
Motorola razr V3
Your phone may be network carrier locked! Means it will only on one network.
Contact you previous carrier & request an unlock.
You will have to give them the Imo No of the handset
239 views | 0 helpful votes
Not finding what you are looking for?