LG Heating & Cooling - Page 2 - Recent Questions, Troubleshooting & Support


Please share your model and serial numbers with us so that we can better assist you. Thanks

LG Heating &... | Answered on May 02, 2019


Sounds like it maybe a refrigerant charge problem. Do you have access to refrigerant gauges? Do you also know the model and serial number?

LG Heating &... | Answered on May 02, 2019


Sounds like you may have gotten something wet that shouldn't have during the coil cleaning process. Power unit sounds to be working, but control board may have been damaged.

LG Heating &... | Answered on May 02, 2019


Blower wheel maybe out of balance, loose, debris trapped inside, and faulty bearings on the blower motor.

LG Heating &... | Answered on May 02, 2019


To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star disappears from the operation display.

LG Heating &... | Answered on May 02, 2019


Brahmadas, If you could provide the model and serial number of both the indoor unit and the outdoor unit this would greatly help answer your question.

LG Heating &... | Answered on May 02, 2019


Its mismatch or setting problem..
4_30_2019_3_31_55_am.jpg

LG Heating &... | Answered on Apr 30, 2019


What is the problem ch 54

LG Art Cool... | Answered on Apr 24, 2019


Connect the remote controller cable to

the wired remote controller installation board as shown in the right picture. 12V SIG GND Red wire Yellow wire Black wire 12V SIG GND 4. After fixing the

top part of the remote controller to the installation board as shown in beside picture, press the bottom part to assemble the controller to it's board. When

disassembling the remote controller from the installation board, use the driver as shown in the right picture and insert it into the hole with the arrow. And

when you pull the driver in the front direction, the remote controller will be separated. Wall Side Wall Side ENGLISH Red Yellow Black Remote Controller

Cable ?The remote controller cable is connected as factory default. Wall Side Wall Side 2. After fixing the cable to the guide slot, attach the wired remote

controller installation board at the desired location.

LG Heating &... | Answered on Apr 19, 2019


Hi sir we have super general mounted split ac e6

LG LSC183VMA... | Answered on Apr 06, 2019


What is the problem of error code “Lo”

LG LSC121PMA... | Answered on Apr 02, 2019


you likely got the controls wet on the outdoor unit. pull the disconnect outside for a couple of hours and plug back in.

LG Heating &... | Answered on Mar 31, 2019

Not finding what you are looking for?
LG Logo

3,262 questions posted

Ask a Question

Usually answered in minutes!

Top LG Heating & Cooling Experts

Felizardo Erilla
Felizardo Erilla

Level 2 Expert

241 Answers

Donni Steen

Level 3 Expert

687 Answers

Steve F

Level 3 Expert

1316 Answers

Are you a LG Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...