LeapFrog Toys - Page 6 - Recent Questions, Troubleshooting & Support

All of these are worthless answer given by bots.Hold down the volume down, home key and the right directional key.....wait till it shows the usb cable icon. connect to your pc with leappad connect software....tune and then select repair.

Hi, I just had to take a picture and theyre sending a new one, I dont have to return the broken one

I used the pencil eraser first on each of my daughter's cartridges. Then I used a qtip to rub them with rubbing alcohol. Finally I used a blow dryer to blow out where the cartridges are installed and now her games are working just fine.

Hello there. Leap pad2 does not have Wi-fi. It can only be connected to another computer with mini usb.

Hi, you can call LeapFrog Support. They will fix this for you. their details are 01702 200244 or [email protected]

Perhaps you try to find out in the shop you bought this? Would not be wise to give any code here, because it is not sure a parent or a child is asking this.

Try this Ensure that a cartridge is not inserted Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER menu appears.When the LEAPSTER menu screen appears, press the A button.Touch each of the crosshairs that appear with the stylus, Restart unit

Try this: Leapster unresponsive screen fix

Point your web browser at http://www.facebook.com If another account comes up, log out of it by clicking the down-pointing triangle in the upper-right then clicking "Log Out." If you then still can't log in to your account, click the "Forgot your password?" link located just below the password box on the login page. If you're getting an error message, what does it say?

No, it doesn't seem possible to get replacement stickers for the center book on the Learn & Groove Musical table. I asked the support team at Leap Frog and they said they do not supply replacement parts. So I bought a sticker sheet from a craft store and cut out my own replacement stickers. Attached is a photo of the end result.

Disconnect USB cable and plug it back in, making sure it's properly seated. Also check if your PC have at least 500 megabytes free space - sometimest that cause sync issues.

Try taking out the batteries and running an eraser over the contacts. One other thing plug it in with the batteries installed and try turning it on. After it comes on then unplug and see if works. Also make sure you are using the right kind of batteries. I had to use alkaline to get our to work.