Konka Televison & Video - Page 8 - Recent Questions, Troubleshooting & Support
Iaccidendally push factory default on my remote now tv will not power on
Do a reset to this TV and check. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts
. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
on Dec 01, 2014
How to set codes for KONKA 14" TV?
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
Search the site by type in the brand name to your device, in the "Search this Blog" window, and press Enter.
on Nov 22, 2014
I have to hit my tv to get a picture
these old sets operate in a high heat environment inside, the solder on the circuit boards gets brittle and cracks eventually causing certain circuits to quit operating. When you hit the case it causes the loose component to temporarily make contact and so you have a picture again. The circuit boards need to be resoldered for this to be corrected. This is not a difficult thing to do for someone with soldering skills. The inside of a tv with a crt, (the picture tube), can have 20,000 volts or more inside even when the set is off so probably a novice should not attempt.
Konka K2068U 20"...
on Sep 26, 2014
I don' t have the code for TV KonKa model k 2386 U and my remote control no working
I have one universal remote Atak RA 10, but it don't have the code for konka TV.
Konka K2386U 23"...
on Sep 17, 2014
Where can i get a
Copy/Paste the above addresses to your address bar in your browser to get the manual(s)
Hi I am pleased to inform you that I think I have found a service manual at the link above, this has all circuit and schematic diagrams and servicing data inside.
on Sep 05, 2014
Not finding what you are looking for?