King Kutter Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 34 Products
  • 73 Answers
  • 13K Views

lift The brush hog up and place on blocks or other foundation that wont fall over. disconnect the power take off shaft from the tractor. Now look for two round openings in the middle of the deck one on ether side of the gear box (the thing on the brush hog that the pto shaft from the tractor hooks up to to make it spin there might be a slip clutch on the shaft but go to the box in the middle) Now turn the shaft till you see the blade nuts in the hole These could be castle nuts with a small carter pin locking them so they don't unscrew. Remove the pin and with a large socket set unscrew it from the bolt then knock the press fit bolt down and the blade will come off, do the same to the other blade if you need them both off. To put them back on use something under the blade and bolt to hold it up so you can start the nut then reverse the order and put everything back on. The blade bolt might be stubborn to get out just take something that fits through the access hole like a wood doll or long punch and drive the bolt down till it comes out as it is press fit and is jammed up to keep the bolt from turning, when putting it back on you will need to make it tight so the bolt can repress back in. Be Careful when reaching under to set the blade and bolt back in. There is not much you can mess up it is just a big nut and bolt Just make sure you put the blade on the way it came off if you do one blade or one at a time you can look at the other to see which way it goes.

King Kutter... | Answered on Oct 06, 2014


a company called SKF has what you need they have a online catalog SKF.com
most Grainger outlets can get these for you (Grainger.com)

King Kutter Pull... | Answered on Sep 05, 2014


-Make sure sway chain is tight.


Good luck.

mai

King Kutter Ii... | Answered on Sep 03, 2014


take the whole thing apart... Wow and I looked, thats ugly

King Kutter II... | Answered on Dec 28, 2013

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top King Kutter Experts

Jay Finke
Jay Finke

Level 3 Expert

1389 Answers

George Merkley
George Merkley

Level 2 Expert

194 Answers

john h

Level 3 Expert

19466 Answers

Are you a King Kutter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...