Jet Tools & Hardware - Others - Recent Questions, Troubleshooting & Support

sounds like the motor is burned up. a common occurrence in this unit.
very sorry

Jet Jssg-10 Slow... | Answered on Jun 29, 2015

You likely have something bound up or a bad bearing. Take the belt off and turn things by hand to verify they work smoothly

Jet 414551... | Answered on Feb 05, 2015

Screw a starting pin ( see manual) into the base plate then cut a small block of wood that engages the face of the cutter and the starting pin. This locks the spindle and stops it moving. Use the supplied spanner and tap with a mallet. Tap the cutter to loosen it. Dave and Graham.

Jet 708319/JWS -... | Answered on Oct 16, 2013

check for loose connections in the controller box

Jet 708375VS... | Answered on May 21, 2013

Not finding what you are looking for?
Jet Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Jet Tools & Hardware - Others Experts

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tom Chichester

Level 3 Expert

40357 Answers

Are you a Jet Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides