Jaguar Logo

Jaguar Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 265 Products
  • 16K Answers
  • 599K Views

Does the car engine turn over when trying to start if not it might think it's in gear is the shift gate lighting up with ing on

Jaguar Cars &... | Answered on Nov 25, 2018


Find code help on youtube ok

Jaguar Cars &... | Answered on Nov 24, 2018


It could be the heat shield which is external which can be repaired or the catalyst inside the converter may have broken, which means that it must be replaced.

Jaguar Office... | Answered on Nov 16, 2018


Whilst the vehicle is running with the normal key being used hold down the valet button for a few seconds

2005 Jaguar... | Answered on Nov 15, 2018


disengage the alarm system by disconnecting the hot wire to it ..then see if this still happens. if it is, and my theory is it is the alternator....start the car , and disconnect the battery..if it stalls it is the alternator.

Jaguar Cars &... | Answered on Nov 15, 2018


RockAuto should have a replacement

Jaguar Cars &... | Answered on Nov 14, 2018


It could be as bunnydawg suggested but thiers quite a few other things that could cause that sound.You need to be a little more specific as any of the rotating parts,drive shaft etc,could be the cause of the noise.If not the engine making that noise which is odd as it only gets noisy at specific times,60 and up Check drive shaft uni joints,tyres and harmonic balancer also make sure none of the front pulleys arnt loose.Good luck

1990 Jaguar XJ6 | Answered on Nov 14, 2018


Codes 51 and 52 are for Front Safety Belt Buckle and Seat Track Position Switches. As X Type belts are 51 and 52, drivers side and passenger side Seat Track Position Sensors (If it's one of your AWD models) or the Driver's Seat in the Diesel (Not one on the Passenger Seat in FWD cars!) They're riveted to the seat track, so not so easy to get out! Might just need the connector cleaning up. That has worked in some cases.

2005 Jaguar... | Answered on Nov 09, 2018


there is a Code 49 that, along with 51 and 52, cover Front Safety Belt Buckle and Seat Track Position Switches. As X Type belts are 51 and 52, there seems to be a good chance that 49 is the Seat Track Position Sensor on either the Driver's or Passenger's Seats (If it's one of your AWD models) or the Driver's Seat in the Diesel (Not one on the Passenger Seat in FWD cars!) They're rivetted to the seat track, so not so easy to get out! Might just need the connector cleaning up.

Jaguar X-Type... | Answered on Nov 09, 2018


intermittent loss of the speed signal from the Ignition System. It will not detect a missing speed signal on cranking.

Jaguar Cars &... | Answered on Nov 09, 2018


Enter any code 3 times so that the display shows "PLEASE WAIT"

Simultaneously press ">>" "PTY" "A.MEM" should only take 2 or 3 seconds and the radio turns on.

Jaguar Cars &... | Answered on Nov 09, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2002 Jaguar X-Type
2002 Jaguar X-Type

1,679 Questions

2000 Jaguar S-Type
2000 Jaguar S-Type

1,382 Questions

2003 Jaguar X-Type
2003 Jaguar X-Type

887 Questions

2004 Jaguar X-Type
2004 Jaguar X-Type

685 Questions

2001 Jaguar S-Type
2001 Jaguar S-Type

638 Questions

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

Marvin
Marvin

Level 3 Expert

84524 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14640 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...