Indesit Ovens - Recent Questions, Troubleshooting & Support

Probably not. The only real cure is to replace the fan motor. Don't forget the nut folding the fan blades on often has a reverse thread.

Not sure if this is your model. http://www.yourspares.co.uk/advice/how-to-change-an-oven-thermostat-on-an-oven-hotpoint-indesit.aspx

Power supply connection has a loose wire.

Error code A03. Replacement: XFT135 XFT135-0D06 2230482. Sensor issues or bad wiring is the usual cause.

Please download your manual here :
http://safemanuals.com/user-guide-instructions-owner-manual/ALASKA/MWD-2925-GC-_V
Regards

Question edited for clarity. Two question amalgamated into one. Duplicate question deleted. Refresh page to see your question. Full 'make model (what it is)' in all questions please. High Temperature Silicone Sealant.

HIGH TEMP 100% RTV Silicone Sealant

Dap.ca https://dap.ca > caulks-sealants > specialty > high-temp Features & Benefits · High temperature formula · Service temp up to 550°F (intermitent) · Ideal for flue pipes & other high temp applications · Shrink & crack ...

DAP HIGH TEMP 100% RTV Silicone Sealant

Home Depot https://www.homedepot.ca > ... > Caulk & Sealants DAP HIGH TEMP SILICONE is a high-performance sealant designed especially for extreme high temperature applications. It provides a long-lasting, ... ..

Question edited for clarity, wrong type of 'made' versus 'maid'. All questions need FULL 'make model (what it is)' please. It appears to be an obscure model GE wall oven? https://www.google.com/search?q=PSB9240SF6SS Turn it off at the breaker and leave it off overnight. In the morning press and hold any button for 2 minutes. This fully dissipates any memory in the control board. The reconnect the power. Not sure who 'Beniam' is? https://www.google.com/search?q=Beniam ..

Yes, they are usually the same element if the same shape.. Or just buy a new one? https://www.google.com/search?q=West+King+universal+Vista+view+oven+replacement+element ..

To change the thermostat on a Defy oven with the serial number DGS 158 AA 14 11 100288, follow these steps:

1. Disconnect the power to the oven by unplugging it from the wall outlet or turning off the circuit breaker that supplies power to the oven.
2. Remove the screws that secure the back panel of the oven to the frame. The back panel is typically located at the back of the oven, near the bottom.
3. Once the back panel is removed, you will be able to access the thermostat. The thermostat is typically located near the top of the oven and is a small, round component with a knob or lever that controls the temperature.
4. Disconnect the wires that are connected to the thermostat. There should be two or three wires connected to the thermostat.
5. Remove the thermostat from the oven by loosening the mounting screws that secure it to the frame.
6. Install the new thermostat by reversing the above steps. Make sure to connect the wires to the correct terminals on the new thermostat.
7. Replace the back panel and secure it with the screws that you removed earlier.
8. Restore power to the oven by plugging it back into the wall outlet or turning the circuit breaker back on.
9. Test the new thermostat to make sure it is working properly.

Note: These instructions are general guidelines and may vary depending on the specific model of your Defy oven. If you are unsure of how to change the thermostat on your oven, it is recommended that you contact a qualified appliance repair technician for assistance.

Hi Jacqui and Sven,

Check these guys out...you'll have to call or write, but they should be able to answer any (and all) questions about the Everhot Deluxe 204. They even carry spare parts! Hope this helped.

http://www.woodstoves.com.au/html/everhot_parts.html#Everhot

I have the same problem with a Kenmore oven. Looks like the oven walls have bent outward.