iLO Televison & Video - Page 9 - Popular Questions, Answers, Tips & Manuals

YOU WANT TO CHECK THE FUSE IN SIDE THE T.V ....

1. Find codes for each device and brand onpage numbers shown below.2. Press and hold the TV, VCR1, VCR2•LD,SAT•CABLE, or AUDIO button you want toset up.3. Enter the three digit code from theTV, VCR, Laserdisc Player, Satellite Receiver,Cable Box, or Audio code list.Device PageTV 11VCR 12LaserDisc Player 13Satellite Receiver 13Cable Box 13Audio Equipment 144. Release the device key.5. With the device on, press another button, forexample CHANNEL UP. If the deviceresponds, no further programming isrequired. If the device does not respond,repeat 2-4 using another code.

you possibly have faulty t-con board

You will need to have the set professionally diagnosed. You could either have a faulty power supply or main board. You could also try unplugging the set for a bit and plugging it back in. I doubt it will solve your problem but it is worth a try.

Change input device to some other like a DVD player.Switch off TV, switch off power, remove plug and wait for 48 hours and retry. If problem persists, call in a qualified service technician.

Visit the site named 'Electro-help' for more details. Click this link. View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. It will make search easy. There are more than 900 posts to different brand TVs now. Pull up older posts there.

Try changing the input device to something you are sure, works such as a DVD player. Switch off TV manually, switch off power, remove plug and retry after 48 hours.If problem persists, please refer it to a qualified service technician.

This sounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby power supplythat is running 7/24 if the set is plugged in and it supplies voltage to theremote circuit that turn on the main power supply for the tv and hence turn theset on.This is an area where companies cut corners by using lower rated voltage caps.By this I mean Standby usually provides under 10 volts to trigger the seton----what they do is use filter caps rated at say 10 volts max in a circuitwith 9 volts (example)=with the standby on all the time the filter caps(electrolytic caps) dry out and fail.The problem usually begins where you have to turn set on or or two times andgradually gets worse--takes longer and more tries to get it to come up.Once on it will stay on until turned off for a period of time.The caps will begin to work better (regain some of thecapacitance) as they get hot--hence one it is on it will seem ok.The beauty of this problem is most of themhappen when set is a year or two old (no warranty) and all you have to do islook at the top to locate bad ones.They are generally black or blue and round and vary in --they have twoconnections each--a + for positive and a - for negative--not unlike a batterywhich in a way they are. The + and - are marked on top and bottom of most boards.They are easy to replace and not expensive parts.The tops are silverand metal looking with creases on top and if bad they will be puffed up ontop---tops must be perfectly flat with no brown material leaking top or bottom.If this is your problem once you id them (make a drawing) you can begin.Here is the critical part---on each cap is also marked the value like 220uf 10vdc---220 micro farad at 10 volts maximum.If you find for example 6 puffed up and all are 10 vdc replace them with thesame value capacitance (like the 220 uf) but go up to at least in this case(from 10 volts) to a 16 or higher rated voltage cap.The only issue is when you go up in voltage rated value the cap is larger sosometimes there is an issue of physical space for the replacement on the boardto fit them in.The reason they cheapen these sets in this way is if 10 caps and you make25,000 sets there is a considerable savings in parts cost. They do not care as long as it lasts past the usual one year parts warranty.I have taken the time to be long winded because this really sounds like it maybe the problem you have.See attached photo of a typical cap and if you have questions or need advicelet me know.

If you want to buy an original one, you must have to contact the nearest authorized service center for ILO at your town. If you want to by a universal remote control, you can get it from most of the electronic spare part selling shops at your town. When buying such a remote control, check whether its code list have setup codes for ILO TV. You can get this detail from the code list accompany with the remote control.

You can go into the settings on the TV, and tell it to do an auto search, but are you using the same cable?You said from "a cable" to "a cable", implying you are moving it to a different room or something. If that's the case, it's entirely likely that you just don't have signal in that room/cable. If that is not the case, then it is also entirely likely that the signal sent by the cable provider is essentially only available through the box (check with the cable provider for details on that... lots of variables there).

Switch off TV, switch off power, remove plug and wait for 48 hours and retry.

Look for swollen caps on the power supply and replace if needed. If caps look good, then replace your main board

Consult the owner manual or contact the maker= Google the model number to search for manual or address and phone number.

the troubleshooting from TV is split in 4 way a)Raster b) Video c) Audio d) Synchro.Now you have Sinchro problem:see the block has dive synchr vertical+synchr horizontal this signal goes to the CRT.IN short tracking the signal.see the block d.

If this is an LCD TV, show a flashlight from a safe distance and check you can see the pictures. If you can, the backlights have got affected. If not, there are some defects in display board or display itself. That anyhow should be investigated only by a qualified service technician.

Please check whether you have selected the correct input from the remote control. Secondly connect the input to some other TV and ensure that there is signal.

press the menu button at the tv panel and then select preset then select color adjustment. you can use the channel up/down button to select preset menu and then to make an adjustment you can use the volume up/down button.

Some sets in this size range will not format the picture in HD at full screen but only 4x3 or letter box format.Google the model number with "specs" or consult the owner manual to see what the set is designed for.

most sets have a source or input button on front, side, or in main menu--if not you are out of luck unless have the original remote control--forget a universal.

Try it by its front panel controls.