iiyama Lite - Recent Questions, Troubleshooting & Support

Press the menu button and the power button in at the same time and hold it for 10 to 20 seconds. Then turn the button power of en turn it on . this should work

Your conclusion is as good as any guess I would endeavor to give.

try this site. http://www.iiyama-monitors.co.uk/categories/monitors/iiyama-23-and-24-inch-Monitor.aspx

do exactly this:
- power off monitor with the POWER button!
- unplug power cord
- hold -/+ and keep holding them when briefly pressing POWER to get the monitor back on
- press menu

You are now in the service menu. Adjust the settings as you like.

- press EXIT
- power off monitor with button
- power on monitor with button
- AUTO SETUP... will be performed
- re-adjust brightness/contrast

Done!

edwin (rdam nl)

Look at this page http://www.wizardanswers.com/liquidvideorepair.html and see if your monitor is put together similarly.

To solve the problem of left-alignment, try setting the output of your computer to 75Hz. See http://support.microsoft.com/kb/311403 for how to do this.

The menu switch needs to be replaced.
This needs technical repair skills.
Samir

move the mouse u will get everything back plus right click on ur desktop go to properties and go to screen saver and change the mins so it don't switch after a couple of mins

hi how old is ur monitor? is it a old type or a lcd.....in any case i would not open it ....if its a old monitor put it in the trash......and get a new one.....other wise if u have lcd get it checked out .....

Hi Sammy7!!

I have such iiyama AS4636D monitor. In this day purchase.
I have such problem with you.
My solution:
Desktop pc and lcd power off (230VAC or 110VAC)
Power on lcd, after early desktop pc.
This moment, when running the pc booting, press and hold you the " + " button.
In this moment come in one blue screen. May be running on the sreen short message: check or select input mode: VGA DVI 1 2 . Select your correct cable connection type.


Have a nice day! and happy new year!

Lajos from Hungary

i do not know that but if it run under windows xp you can try in this
way . if you click on windows start with mouse you have to reach
control panel and after that there is (in classic diplay ) sound and
peripherals , there yopu can try to check for the speakers if they are
connected or not - i hope it was correct  - delfo