Hoover Logo

Hoover Recent Questions, Troubleshooting Help & Support

  • 833 Products
  • 38K Answers
  • 867K Views

have you done a clean ,hoover have this built in you need to do every so often the filter could be clogged do a clean don't put anything in when your doing this ,how old is it

Hoover Washing... | Answered on Jun 16, 2017


cord reel assembly maybe the spring jumped one time over out over 1 of the confirmationpoints of the reel assembly or the roller on the shaft is worn something is broken on the shaft and or mounting points that it tilts and walks somewhere against, sometime its better to get out the spring of the unit instead of repair because of the costs.

Hoover Powermax... | Answered on Jun 15, 2017


I would definitely check out the epoxy route.

Hoover U6630-900... | Answered on Jun 14, 2017


Local vac shop can help

Hoover Vacuums | Answered on Jun 12, 2017


You can get the new cord at your local vac shop or you can take the power nozzle to the shop and have it repaired

Hoover Powermax... | Answered on Jun 12, 2017


Most of the time the turbine bearings have seized. At my store we re-grease them and they are better than new, but also the turbine can be replaced. You should take it to your local vac store for repair.

Hoover Vacuums | Answered on Jun 12, 2017


Local vac shop can help

Hoover Vacuums | Answered on Jun 12, 2017


99 out of 100 times it's not the handle release pedal that's broken. it's the knob on the rear housing broken off. You will have to replace the rear housing. Take it to a local vac shop for repair.

Hoover Vacuums | Answered on Jun 12, 2017


burned up motor. Take it to your local vac shop for a quote on repair or replacement.

Hoover F7458-900... | Answered on Jun 12, 2017


The actuator arm is broken. Common problem. Easily fixed at your local vac shop.

Hoover... | Answered on Jun 12, 2017


Take it to your local vac shop before you toss it. Then at least you will know if it was repairable or not. They can also show you some better quality machines to replace it with if you need to.

Hoover Vacuums | Answered on Jun 12, 2017


Check the nozzle . Turn it over on it's belly and remove the 4 screws that hold the base plate on. Take off the plate and remove the brushroll. I bet you will see a clog in the intake. If not take it to your local vac shop and let them fix it.

Hoover U5262-900... | Answered on Jun 12, 2017


You are correct, the motor is done. Look at your local vac store for a quality vacuum made by Sebo or Miele. Replacing motors in chinese made vacs is a waste of money as the whole product was made to last only a couple of years

Hoover S3765-040... | Answered on Jun 12, 2017


The parts are available for this model but rather than throw money at it by buying parts that you may not need, take it to your local vac shop and let them assist you. It will probably save you some money and time.

Hoover S3755... | Answered on Jun 12, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hoover Experts

yadayada
yadayada

Level 3 Expert

74843 Answers

Brad Brown

Level 3 Expert

15345 Answers

Steve F

Level 3 Expert

899 Answers

Are you a Hoover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...