Hoover Dishwashers - Recent Questions, Troubleshooting & Support


I had the same, but fixed it. A video to help here:

Hoover... | Answered on Aug 12, 2016


I had the same, but fixed it. A video to help here:

Hoover... | Answered on Aug 12, 2016


Codes are pretty generic between Hotpoint, Hoover and Whirlpool.

Heating element fault
Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference
  • LED 1: OFF
  • LED 2: ON
  • LED 3: OFF
  • LED 4: ON
Action: We recommend you call our customer service centre to book an engineer.

Here is the Hoover site.
http://service.hoover.co.uk/advice-centre/dishwashers/


Error codes Hotpoint

Hoover 24 in.... | Answered on Jul 21, 2016


It's probably the heater element that has gone, but it could be a simpler fault like the pressure switch not activating. See this video it should give you the general idea

Hoover 24 in.... | Answered on Jun 29, 2016


You can get an instruction manual here - AFTER SALES SERVICE

Hoover Candy... | Answered on May 03, 2016


These are the instructions taken directly from the DDY062 manual:
Alarm mute for the PROGRAMME END
The alarm for the programme end may be muted as follows:
IMPORTANT The dishwasher must be ALWAYS off before start this procedure.
1. Hold down the "PROGRAMME SELECTION" button and at the same time switch on the dishwasher by pressing the "ON/OFF" button (a brief audible signal will sound).
2. Keep the "PROGRAMME SELECTION" button pressed for at least 15 seconds (during this time, 2 audible signals will sound).
3. Release the button when the second audible signal sounds (3 "PROGRAMME SELECTION" indicator lights will come on).
4. Press the same button again: the 3 indicator lights (which indicate that the alarm is activated) will start flashing (to indicate that the alarm is off).
5. Turn off the dishwasher by pressing the "ON/OFF" button to confirm the new setting.
To turn the alarm on again, follow the same procedure.

Hoover... | Answered on Mar 03, 2016


E4 means that the dishwasher has a problem with discharging water. Check that the discharge tube is not bent and the siphon is not blocked and the filters are not blocked. Depending on how you stored the dishwasher, check for evidence of rodents or insects building nests in the unit.


The manual for the HD97 is available from Hoover at http://service.hoover.co.uk/manuals/Manuals.aspx?Section=3 . Enter the model number and the link will come up. The manual for the free-standing version does not seem to be available separately.

I hope this helps.

Cindy Wells

Hoover 24 in.... | Answered on Feb 17, 2016


Carpet Washer Won't Spray - YouTube

? 1:00
www.youtube.com/watch?v=UxgmE6nV934
Aug 16, 2013 - Uploaded by Hoover Hoover SteamVac Troubleshooting: Carpet Washer Won't Spray.... Having problems with float disc keeps ...Missing: 800el ‎boss

Hoover... | Answered on Sep 25, 2015

Not finding what you are looking for?
Hoover Logo

269 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Dishwashers Experts

Cindy Wells

Level 3 Expert

4952 Answers

Owen Barnes

Level 3 Expert

867 Answers

Tom Chichester

Level 3 Expert

30679 Answers

Are you a Hoover Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...