Haier Washing Machines - Page 4 - Recent Questions, Troubleshooting & Support

Sounds like you have a bad timer.

Drain hose or drain pump is obstructed.

Check to be sure water is cut on and there is actually water coming from hoses. Make sure hot and cold hoses aren’t switch at Machine. Make sure valve and hose screens are free from debris.

it is most likley there is something blocking the drain pump

unplug from the wall socket for several minutes

Motor bearings or tub bearings.

Please clarify what is going on here, your question is poorly words.

Hi try this cheers

if hot water is off at the tap but warm wash selected thats your problem, if not a possible faulty water solenoid

there is something stuck in the pump or pump is faulty,remove pump and check foe anything stuck inside it

if its an unbalance fault make sure the machine is level and not wobbly,if all good then you may need to fit a new set of suspension roads,P.S alot of machines have this problem on small loads