Haier Furniture - Recent Questions, Troubleshooting & Support

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwje75XzxZSCAxVOmokEHXxQBfsQFnoECBsQAQ&url=https%3A%2F%2Fwww.amazon.com%2Fp6r8mc%2Fs%3Fk%3Dp6r8mc&usg=AOvVaw3s7ZWczicVttYruKA_j6FX&opi=89978449

Once I unplugged, pulled away from wall, cleaned components area, plugged back in, all was back to normal!

http://www.haieramerica.com/en/asset/archived/BC112G.pdf
is the link to your manual.Typically in a dual temperature zone wine cooler whites are stored in the bottom and reds on top as whites are better a little colder and the cold air will drop to the bottom of the unit.
Hope this helps!

Push the red and white buttons at the same time for about 3 seconds-the temp will start to flash-then press the white button to lower the set temp-when you have it where you want it then push the set buttom

Haier BC112G service & user manual: To adjust the temp of your unit:

• Push & hold the red wine & white wine button at the same time.This will start the temp adjust. You will notice the plus sign & the negative sign on these same buttons, use them to adjust temp. When you are done hit the light button & it will record the new temp.

Open the terminal box ontop of the compressor. Check if there is a thermistor inside. If there is, check the continuity. If the continuity is alright, check the winding resistance of the compressor. If the winding resistance is good, then the fault is in the controls.

Mr. Lindquist: We are experiencing essentially the same problem. Have tried replacing the temperature control board without change. Would be interested to know if you get a solution.

remove the back metal panel and unscrew the top fan and unplug the terminal the cable plugged into the board. I spread disc brake cleaner and then wd-40 into the coil area with a fan spins. manually spin the fan with your finger a few times to get the lubricant evenly distributed. I had the same with my top fan and if the same