GE Medical - Recent Questions, Troubleshooting & Support


These usually have a button cell battery to hold the time when its powered off. This backup battery is usually found on the back or underside but may also be inside.

GE Medical | Answered on May 15, 2018


Make sure your print/record speed is 25mm/sec. Most machines have settings of 50mm/sec or 25mm/sec. I bet yours is set to 50mm/sec. RJ

GE Medical | Answered on Sep 28, 2017


If your power line has a two female connection, try unplugging and turning it over ( so the connections are the opposite way around ) plug it back in and try it again, sometimes the current will only flow one way and if it's wrongly connected it will cause the motor to run in reverse.
Jayel.

GE Medical | Answered on Apr 10, 2017


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/

GE MAC 1200 EKG... | Answered on Mar 08, 2016


Sorry, but we don't send mails. You can download the manual, on the first hit in Google with your words: service manual ge mac 500.
I can't get the link in here, because as soon as I click it, it starts downloading.

GE Medical | Answered on Feb 09, 2015


you can visit this web and you can download service manual for eny devices : http://www.frankshospitalworkshop.com/equipment/ecg_service_manuals.html

GE Marquette... | Answered on Nov 22, 2013


i have the same problem, i think you should update the softwere

GE Marquette... | Answered on Nov 21, 2013


Hi ,
I'm sending you the manual...Mail me your id to durai_vcd@yahoo.com

RGDS
Durai

GE Medical | Answered on Jun 12, 2013


Hi,
There will be an MOV (metal oxide varistor) After fuse. This MOV is rated 125v. When you plug the machine in to 220v supply this MOV will become shorted and its blows the fuse to prevent further dameges to the power supply. Replace the MOV and then insert the fuse. I have added the image of MOV here. It is placed parallel to the AC mains supply rail after fuse.

Ajin




5_7_2012_3_56_07_pm.jpg

GE Marquette... | Answered on May 17, 2012


Our EKG machines at work have specific paper that will only work with them, are you using the same type as before? Also, it is possible to put the paper in upside down and it will not print on that side. Have you tried to turn the paper around? Good luck

GE Medical | Answered on Nov 15, 2011


hi,
You have to check the battery of you monitor . If the battery is short then this problem can occur.
ok

GE Marquette... | Answered on Sep 24, 2011


You need to consult the manual, there are multiple printout formats on this machine and it appears that it is looking for data for a print out formation and when it finds none, it skips and then prints again.

GE Medical | Answered on Jul 05, 2011


hi,
remove the AC power. then remove the battery from the machine. reinsall the battery after 15 minutes. then power on. it will be at factory settings. if u need its service manual pls contact me through fixya . for removing battery watch the pictures bellow.
ok

ajin_g_10.gif
ajin_g_11.gif

GE Marquette... | Answered on Jan 11, 2011


Hello,

The eagle 4000 monitor will not work with three leads.

Take care.

GE Marquette... | Answered on Oct 18, 2010

Not finding what you are looking for?
GE Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top GE Medical Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Brad Brown

Level 3 Expert

17328 Answers

Vuk B

Level 3 Expert

683 Answers

Are you a GE Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...