Frigidaire Freezers - Recent Questions, Troubleshooting & Support


it is actually 'Sb', you are in Jewish Sabbath mode which prevents anything being turned on or off on a Saturday.

The display shows "Sb" or "5b" while in Sabbath mode.
SB Sabbath Mode
The Sabbath Mode is a feature that disables portions of the fridge and its controls in accordance with observance of the Sabbath and religious holidays within the Orthodox Jewish community. Sabbath Mode is turned ON and OFF by pressing and holding "?" on freezer temp and "?" on refrigerator temp for five seconds.
In the Sabbath Mode, the High Temp alarm is active for health reasons. If a high temperature alarm is activated during this time, due to a door left ajar, the alarm will sound for about 10 minutes. The alarm will then silence on its own and a red high temperature icon will display. The high temp icon will continue to display, even if the door is closed, until the Sabbath mode is exited and the icon reset. The refrigerator will function normally once the door is closed, without any violation of the Sabbath/Holidays.


https://www.google.com/search?q=Error+code+56+on+Frigidaire+upright+freezer

Here is a list of all the error codes.

Frigidaire Refrigerator Error Codes Fault Codes

Frigidaire... | Answered on Aug 01, 2019


Always at least and inch or two away from wall.
consult your installation instructions or use guide for info

Frigidaire... | Answered on Jun 24, 2019


The temperature control is located inside the freezer on upright models, and onthe left outside wall on chest models. The temperature is factory preset to providesatisfactory food storage temperatures.

However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. If acolder temperature is desired, turn the temperature control knob toward COLD-EST and allow several hours for temperatures to stabilize between adjustments

Frigidaire... | Answered on Jun 16, 2019


Freezers expel warm air. There should be no 'blowing' inside. If it is expelling warm air, then it is working fine, eventually the expelled air should get cooler and cooler.

Frigidaire... | Answered on Jun 06, 2019


call a repair service or go buy a new one

Frigidaire... | Answered on Jun 04, 2019


That yellow light on sonne older modelks is just showingbtge power is on. I never heard of a chest freezer having a "quick freeze" feature. This feature would also require forced air cooling and auto defrost. If the walls get frost on ghr m t hen Im betting that is ju st a power light although it may say freeze or something else like that. Its just so when you see the yrllow light you know there is power.

Frigidaire... | Answered on May 20, 2019


Otherwise it would never stop freezing. Let me know what you find out.

Frigidaire 20.3... | Answered on May 02, 2019


Typically, error code "HI" (the customer may say "H1") on a Frigidaire refrigeratorunit indicates that the unit has detected high temperature in the freezer and/or therefrigerator https://kb3.s2g.net/index.php?/article/AA-00411/0/Frigidaire-Refrigerator-Unit-Flashing-HI.html

Frigidaire... | Answered on Mar 29, 2019


Good Afternoon Friend,

I understand that the temperature alarm light is on for your Frigidaire freezer, model# FFU21M8CW. This feature is designed to provide a warning of a possible malfunction. If the temperature of the food rises to a level unsafe for long-term storage, the buzzer will sound. The red light, if equipped, will also glow. The Temp Alarm feature operates on household electricity. If power fails, the alarm will not function. An ON/OFF switch allows you to deactivate the Temp Alarm when not wanted. Your freezer is shipped with the Temp Alarm in the OFF position. After your freezer has run approximately 4 hours, the red light, if equipped, will go off. Then you may activate the Temp Alarm without the alarm sounding. Press the ON switch to activate the Temp Alarm. To deactivate, press the OFF switch. If the alarm sounds, be sure freezer is properly leveled, and the door closes freely, and seals properly. If you suspect a technical malfunction, call an authorized servicer immediately. Hope this is helpful.

-Best Regards-
WP

Frigidaire 20.3... | Answered on Mar 26, 2019


Hello Michael - Sounds like the temperature control was accidently turned OFF. When this occurs the temperature control turns off the compressor, but does not disconnect the power to the light bulb or other electronics. Let's try activating the freezer by pressing the UP arrow until display shows "4" or desired setting. Allow 24 hours for temperature to stabilize. For future reference you can lock the control to keep from accidently changing the temperature setting. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if the unit's status has changed successfully. Thank you.

Frigidaire 20.3... | Answered on Mar 04, 2019


Many reasons why it may be loosing temperature. Such as Defrost problem, fan not running, sealed system problem, compressor problem

Frigidaire... | Answered on Jan 18, 2019

Not finding what you are looking for?
Frigidaire Logo

1,948 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Freezers Experts

Dennis Boxerman

Level 3 Expert

1300 Answers

Bruce Denton

Level 2 Expert

273 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a Frigidaire Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...