Dayton Audio Saws - Recent Questions, Troubleshooting & Support

If you haven't found one, I can send you a scan of mine.

Please refer to this website Horizontal Band Saw Wet 1 1 2 HP If you'd like to purchase blades , check sawblade.com

This is your blade dimension 119-1/2" long x 1" wide x 0.035" thickness . You can purchase blades on sawblade.com .

The blade length for your band saw is 119-1/2" .

If you are replacing the blade just use a tape measure around the two wheels. This will give you the measurement you need. GOOD LUCK FRIEND.

Try this site for aftermarket replacement parts: www.bandsawparts.com.

I found a website that has a manual for such band saw. I think it was... bandsawmanual.com. Hope this helps

If the fuel in it is 2 or more months old dump it out and put in fresh fuel and try statring. Also try try a squirt of starting fluid into the carb. If it fires on it you may need to do this a few times to pull the old fuel in the lines through till the fresh fuel can get to the carb.

closes I could find.copy and paste.https://www.carbatec.com.au/documents/manuals/Carbatec/Bandsaws/SW-1401-manual.pdf

Question edited for clarity, 'make model (what it is)', in full. No manual, just parts. Try black and Decker direct. https://www.google.com/search?q=black+and+decker+9443+bandsaw+manual https://support.blackanddecker.com/hc/en-us/p/all_locations ..

@Brian AndersonIt is better to write a new question rather than tagging an unsolved question from 10 years ago. It is now stuck on the Homepage as 'Pinned' and still showing Unsolved! :>Dhttps://www.google.com/search?q=+Dewalt+DW936+remove+the+guard+assembly..

It should be an issue of calibration, but no one else has experienced this issue. contact SCM Support direct. https://www.google.com/search?q=SCM+Nova+SI+400EP+Sliding+Table+Saw+calibration ..

https://www.manualslib.com/manual/1823573/Twin-Cut-Power-SawPlus.html?page=17#manual