Curtis-Mathis Televison & Video - Recent Questions, Troubleshooting & Support


I own a One-for-All universal remote, and my booklet says the setup code for a Curtis Mathes TV (without a built-in DVD or VCR) is one of the following numbers: 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0702. I can not guarantee these numbers will work with your remote, but it is worth a try.

Curtis-Mathis... | Answered on Aug 03, 2018


I have a curtis mathis console tv with a 8track player, casset player record player and a am/fm stereo, mod number on the box is F607 style TC2 seril number 04787814 new in the box never opened. where can i find out its value?

Curtis-Mathis... | Answered on May 24, 2018


If it is a tubed TV, repair the frame stage.

Curtis-Mathis... | Answered on Oct 01, 2017


Rebecca,
You should only need to connect the red yellow and white wires to the TV. Make sure your TV is set to the aux input/video input. Sometimes this is a channel, sometimes you have to change the video source. There might be a dedicated button on your remote for this. I believe your TV is only standard definition (non HD).
Greg

Curtis-Mathis... | Answered on Sep 24, 2017


any user manual online ?

unplug from wall

see if remote will get you to system settings audio

Curtis-Mathis... | Answered on Apr 06, 2017


The contrast setting controls the relation between the light and black areas of the screen. If the light areas are too bright and are losing details, press the CVOL button; if the picture is gray and lacks contrast, press the VOLB button

The brightness setting controls the overall amount of light in the picture. If the picture is too bright, press the CVOL button; if the picture is too dark, press the VOL B button

The color setting controls the intensity of color.

Curtis Mathes CM19102 Owner Manual Returning To The Factory Settings...

Curtis-Mathis... | Answered on Apr 09, 2016


I have a curtis Mathis model number cm19102 . I have no remote. It is stuck on no more than 14 channels. Then the word line comes up on blank screen. How can I get it to get more channels

Curtis-Mathis... | Answered on Jan 21, 2015


U have a RCA AV component cable R,Y,W just hook that up for the out for the VCR-out put holes and the other end of the cable R,Y,W just hook it up TV-in input holes.That it,now put TV in Video 1 or 2 and play the VCR- VHS tape.Look in ur Phone book Yellow pages.Tv repair,any tv shops can do the CRT-tv analog tv repair.

Curtis-Mathis... | Answered on Jan 08, 2015


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Curtis-Mathis... | Answered on Sep 28, 2014


Degaussing posistor resistor fail. If you wish to get some details; check the site linked here. Pull up older posts.Surf the site with patience.http://electronicshelponline.blogspot.com/

Curtis-Mathis... | Answered on Sep 22, 2014


One cm is ten mm, so 1.1 cm is 11 mm.

Curtis-Mathis... | Answered on Aug 15, 2014


Check whether volume is set to Zero. If it is found OK, Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Curtis-Mathis... | Answered on Aug 13, 2014


Try the link below:
http://www.curtis-mathes.com
They should be able to help you with the
tint on your televisionicon1.png not look right. A member of their site should be able to help you with the menu and other problems you might be having, and they do it for free :)

Curtis-Mathis... | Answered on May 06, 2014


A explanation that may tell you what is happening:

Some of their sets had this issue. The picture tube has a metal screen inside directly behind the stripes that make up the phosphor coating on the inside of the picture tube.

It is called a shadow mask. It has perforations that line up with all the stripes on the screen (look close--red-green-blue stripes all outlined in black--tiny).

What is wrong is not fixable even if the tube is replaced----the metal used in these sets for the mask contains iron which causes it to expand in areas with real bright scene changes--

No need to remove question as I saw it and answer questions for most TV area problems.

I actually ten years ago worked for Circuit City--saw at least 5 sets (all larger Toshiba sets) with this issue. On seeing first one called our support staff and someone explained to me the issue---that set was under extended warranty and since the customer was angry the set was "exchanged" for a brand new set and the old one was disposed of.

Curtis-Mathis... | Answered on May 06, 2014


This fault is called one color predominant screen. The cause might be to its video output card itself. There will be some loose solder terminals around the Green video output transistor. Check this card for any loose solder terminals. Just re-solder all the suspected solder terminals by applying a little more solder, without making any solder bridge short in between adjacent solder terminals. This card can be located at the neck of the picture tube [a rectangular board], will be directly plugged on to the back of the picture tube.

Curtis-Mathis... | Answered on May 06, 2014

Not finding what you are looking for?
Curtis-Mathis Logo

204 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Curtis-Mathis Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

The Knight
The Knight

Level 3 Expert

76115 Answers

Are you a Curtis-Mathis Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...