Crosley Dryers - Popular Questions, Answers, Tips & Manuals

Question edited for a lot more clarity. Question moved from Vacuum cleaners category. No they are different models. See the links. PartSelect don't stock parts for your model.

Parts for CDE-8000GWC - AppliancePartsPros.com

https://www.appliancepartspros.com > search > model=c... Original, high quality parts for CDE-8000GWC in stock and ready to ship today. ... Fits some Admiral, Crosley, Norge and Magic Chef dryers.

CDE8000W Crosley Dryer Parts & Repair Help - PartSelect

https://www.partselect.com > Models > CDE8000W This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is ...

1. Sometimes it's cheaper to hire somebody that knows what they are doing instead of the I thought idea. I have done that with my car and found I thought cost me more than the simple problem it was.

Model # is incomplete. Missing a letter to go with MLC or a number with 275.

120.

Do you here is click when you turn on a burner, if so it has electronic ignition system

I would check to be sure you have 220v going to Dryer. Possibly timer problem as heat circuit runs through that too.

sounds like could be bad windings on motor also check belt switch

Check the dryer drum drive belt it may be broken or the dryer drum drive motor may have failed

With this issue I have seen heater wiring issues or the heater element itself. The unit would need to be opened up to find the fault. Be sure to unplug the dryer before attempting any repair!

not getting hot or hot enough? if not hot at all it's probably the thermal fuse is blown, if not hot enough you could have a blockage in the blower vent system, which could be from the blower wheel in the dryer to where it vents out of your house. if no blockage then it's probably one of 2 cycling thermostats

You have not share the year of the dryer, but they are pretty simple, so perhaps this will help. Take the machine apart so you can get a multi-meter or a ohm-meter inside the back to check circuitry. Check for electricity from the plug to the terminals inside the back of the machine. Check the plug for 2 live 110 volt circuits, with 1 ground. Look at all the electrical connections for the heat element and the various thermostats and perhaps the fuse. Undo the wires for each, one at a time, and check for continuity at each. If one of the overheat thermostats has failed, especially check for lint build-up inside the machine in the metal tube between the filter screen and the exhaust pipe at the back. God bless your efforts.

Yes, you probably need a new heating element as you did not list this as being replaced or checked.

check your door switch. if switch is good, I would look at main control board.

Many things can cause this problem . Main timer , door switch,over heat thermal fuse , broken belt ,main power breaker

Crosley Washer Washing Machine - YouTube

alt="Video for Why does my lights keep coming back on my crosley washer">? 1:31

Suspect vent still plugged with lint, leave vent disconnected and run dryer, stay within eyesight when doing this, if the dryer dries the clothes, then look for blockage in the vent pipe to the outside.

isn't that button labeled stop/pause ? if so a quick press of that same button will get it going again

check to see if the drive belt is broken. check out this video: http://www.repairclinic.com/PartDetail/b171p8/Crosley-Dryer-Drive-Belt/341241/529597?modelNumber=CED137SXQ0&ss=a8b171d1287209&mr=1#repairHelpVideoTabs

repairclinic.com may have a video for you to view

replace door lock/switch