Craft Master Sewing Machines - Recent Questions, Troubleshooting & Support

I need a user manual for Nina 2/3/4D electronic control overlocker

try youtube for a video

Craft Master would be a possible source.

either notify company -or online search

Try the manufacturer or manualsonline.com :-)

try the manufacturer and manuals on line .com.

it will all depend on the plug into the machine take the control you have now to any sewing machine service agent and see it they can help

The Craft master 4300 was also sold with the Janome HD1000 label. Thus the Janome manual should help you. That manual is available from Janome at the HD1000 product page: http://janome.com/en/machines/sewing/hd1000/ . The direct link is http://janome.com/siteassets/support/manuals/economy-models/inst-book-hd-1000engfrsp.pdf . I hope this helps. Cindy Wells

Consult your owner's manual for the type of needles your machine needs. Most machines use needles, ie 130/705, that can be purchased at the local fabric shop or sewing machine repair shop. All About Needles ...

i was able to find one at www.ifixmachines.com

There are several ways to order a new craft master 4700 machine is by Internet, any stores that sell these brands of machines, or go to a particular material store and they can help you to order the sewing machine you want. It always helps to have a variety of places one can go to get help in ordering the right thing that one wants.

I dont have a fancy machine but any time Ive experienced this problem I do 1 of 2 things. First I check for bits of thread stuck inside till I removed the bobin case again and discovered the thread way underneath there. Second, if that didnt fix it I rewind my bobbin. Dont know if either would work in your situation. Good Luck.

feed dog button may be broken or loose, may need to be checked.

try these sites, you'll have to call them or email them sewvacdoctor.com a1sewingmachines.com

There is something called limit switch adjustments. They should be on the side of the opener. If the opener is not going up fully, increase the up limit by turning the up screw. Use a flat head screw driver only. 1 full turn of the screw gives you 2in of travel. Same for the down. If the door is not going down fully increase the down limit by turning the screw.