Consew Sewing Machines - Recent Questions, Troubleshooting & Support
Need to find out how to replace the needle bar w/
The proper guide on how to replace the needle bar, please follow the steps below:
- Turn the machine pulley towards you to move the needle bar to its highest position,
- loosen the screw,
- holding the needle to its long groove facing left, insert all the way into the needle bar,
- Tighten the screw.
You can find out more ways to troubleshoot your consew 206rb machine by downloading the link above.
Hope this was helpful to you.
on Feb 12, 2018
I am having trouble with
I wonder if you use a tear away interfacing if it would give it some bite. I wouldn't do too much adjusting because you do not have the training and it can really mess it up. Also, totally rethread your machine making sure that all of the guides and discs are getting the thread. Check the tension of the thread by using the flossing technique.
on Nov 20, 2017
Can I remove the feed dogs on my Consew 220?
Feed dogs on that machine are attached with 2 screws. If you pull the stitch plate, you should be able to get access to them. The issue is when you re-install. You will need to align them so they move the material straight. In other words, it's not a simple thing to do.
on Nov 12, 2017
Not finding what you are looking for?