Cnet CWD - Recent Questions, Troubleshooting & Support

download your drivers here CNet Support CWD 854

Sounds like you need to install the drivers first. You can download them here: http://www.cnet.com.tw/product/cwd-854.htm
Please leave me a good rating, thanks! :)

This is a zip file. You can download & save your computer from this website.
1.For Saving into your pc.

Right click & save target

Download from here

http://www.cnet.com.tw/product/cwd-854.htm if this is the right one =D hope it is

Have you tried changing your IP to 192.168.1.3 and see if that makes any difference

Subnet mask 255.255.255.0

as laurence just said would be nice if you could tell us more info..but you could try this link and see if it helps you out... 10 Useful Options You Can Configure In Your Routers Web Interface ...or this link... configure my router Google Search ..or you could try this.....

1. Open a web browser such as Internet Explorer.
2. Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168.15.1 is the default IP of most VOIP routers. ...
3. A new window prompts for a User name and Password.

Access the Web-Based Setup Page of the VoIP Router - Cisco

sounds like you hard disk is on its way out.

forget the router as it appears that it is messing with the connection

A server that is dedicated to handling users that are not on a LAN but need remote access . The remote access server allows users to access files and print on the LAN from a remote location.

Hi, according to its manual, this is only an L2 switch, so no configuration is needed, if you want to use VLAN in example, you have to install an L3 switch.

Unless I'm missing something, you can't. This is a basic switch with no advanced application aware features.

ping it first. got to start menu, run, type cmd, press enter, and type, ping 192.168.1.254. you should get a reply after you did that. if not, connect to the access point first and go to wireless connection status, click properties, scroll down and look for the internet protocol (TCP/IP) and highlight it and click properties, mark the use the following ip address and type 192.168.0.1~100. this means choose a number from 1 to 100 onthe last slot. after that press tab on your keyboard and you will see that it will automatically generate the default subnet mask. press ok and close the application. got to start menu, run type cmd press enter and type ping 192.168.1.254. if it does not work, i do not know what else you can do. just remember, if it work or not, be sure to put the setting of your wireless network connection status and mark obtain IP address automatically. press ok and close application.

Me dieron un router inal?mbrico -g serie CWR-854v pero no tengo el cd de instalaci?n q me podr?a ayudar mi correo electronico es torigallo_123hotmail.com si alguien tiene este mismo router si podria ayudarme con el cd de intalacion q en las pajinas no consigo para descargarlo

No problem at all. The router can function as bridge with no conflicts with other routers. 

Your router can do 300mbs Like a car can go 150 miles / h. Your car almost never goes that fast. You router neither. The other side, the line to your provider is even more important. They sell up to ??? mb/s, but you never get that speed. Only in the best circumstances someone could come close, but as soon as more users are on line or in the same segment, the speed will drop. I think if you use a 1 Gb/s ethernet cable, from the router to your computer you won't add much to the speed. Even if you have more WiFi hotspots close to you, they can bring your speed down a little. So plenty reasons, why you can try to speed up your connection, but none will really work. At least not as drastic you could reach twice the speed you now have. Sorry