Cnet Computers & Internet - Recent Questions, Troubleshooting & Support


Have you tried changing your IP to 192.168.1.3 and see if that makes any difference

Subnet mask 255.255.255.0

Cnet CWA-854... | Answered on Jan 27, 2018


as laurence just said would be nice if you could tell us more info..but you could try this link and see if it helps you out... 10 Useful Options You Can Configure In Your Routers Web Interface ...or this link... configure my router Google Search ..or you could try this.....
  1. Open a web browser such as Internet Explorer.
  2. Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168.15.1 is the default IP of most VOIP routers. ...
  3. A new window prompts for a User name and Password.

Access the Web-Based Setup Page of the VoIP Router - Cisco

Cnet (CWR-854)... | Answered on Oct 23, 2017


sounds like you hard disk is on its way out.

Cnet Computers &... | Answered on Jun 29, 2017


forget the router as it appears that it is messing with the connection

Cnet CNIG914B... | Answered on May 13, 2017


A server that is dedicated to handling users that are not on a LAN but need remote access . The remote access server allows users to access files and print on the LAN from a remote location.

Cnet Computers &... | Answered on Jan 11, 2017


Hi, according to its manual, this is only an L2 switch, so no configuration is needed, if you want to use VLAN in example, you have to install an L3 switch.

Cnet CGS-1600... | Answered on Jun 06, 2016


download your drivers here
CNet Support CWD 854

Cnet CWD-854... | Answered on Apr 24, 2016


Unless I'm missing something, you can't. This is a basic switch with no advanced application aware features.

Cnet CSH-1600E... | Answered on May 05, 2015


ping it first. got to start menu, run, type cmd, press enter, and type, ping 192.168.1.254. you should get a reply after you did that. if not, connect to the access point first and go to wireless connection status, click properties, scroll down and look for the internet protocol (TCP/IP) and highlight it and click properties, mark the use the following ip address and type 192.168.0.1~100. this means choose a number from 1 to 100 onthe last slot. after that press tab on your keyboard and you will see that it will automatically generate the default subnet mask. press ok and close the application. got to start menu, run type cmd press enter and type ping 192.168.1.254. if it does not work, i do not know what else you can do. just remember, if it work or not, be sure to put the setting of your wireless network connection status and mark obtain IP address automatically. press ok and close application.

Cnet CWR-854... | Answered on Mar 23, 2015


Me dieron un router inal?mbrico -g serie CWR-854v pero no tengo el cd de instalaci?n q me podr?a ayudar mi correo electronico es torigallo_123hotmail.com si alguien tiene este mismo router si podria ayudarme con el cd de intalacion q en las pajinas no consigo para descargarlo

Cnet Computers &... | Answered on Jan 31, 2015


No problem at all. The router can function as bridge with no conflicts with other routers. 

Cnet CWR-854... | Answered on Jan 31, 2015


Your router can do 300mbs Like a car can go 150 miles / h. Your car almost never goes that fast. You router neither. The other side, the line to your provider is even more important. They sell up to ??? mb/s, but you never get that speed. Only in the best circumstances someone could come close, but as soon as more users are on line or in the same segment, the speed will drop.
I think if you use a 1 Gb/s ethernet cable, from the router to your computer you won't add much to the speed.
Even if you have more WiFi hotspots close to you, they can bring your speed down a little. So plenty reasons, why you can try to speed up your connection, but none will really work. At least not as drastic you could reach twice the speed you now have.

Sorry

Cnet WNIR3300... | Answered on Nov 20, 2014


cisco routers make use of an IOS software for configurations.

you have to connect the router to a computer system through an hyper terminal program in order to access the router command interface,there is no way you will be able to configure this router without having cisco configurations knowledge.

the steps could be complex/complecated for a novice.but all the same,

after running the hyper terminal program on your computer to connect the router(start-accessories-communication-hyper terminal) make sure you use cisco serial cable or a cat5e roll over cable.

press the enter key once and type 'enable' then press enter,

configure terminal,to take you to a global configuration mode.

i will advice that you should contact a cisco person in your area for help

Cnet CN UM56-RS... | Answered on May 21, 2014


The router should be configured with your IP address.
Gopakumar Gopalan Google

Cnet CWR-854... | Answered on May 18, 2014


I hope you are connecting the print server to a network hub or switch and not trying to connect directly to your Win 7 machine.
There are no drivers, a print server is a network device. Connect the ethernet cable from print server to your router. connect your printer to the switch. Search the network for the printer.

Cnet CNP 430... | Answered on Apr 08, 2014

Not finding what you are looking for?
Cnet Logo

Family Lines

232 questions posted

Ask a Question

Usually answered in minutes!

Top Cnet Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2276 Answers

Jim LeVerso - IT...
Jim LeVerso - IT...

Level 2 Expert

149 Answers

Pamela Bates
Pamela Bates

Level 2 Expert

149 Answers

Are you a Cnet Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...