Clarion Audio Players & Recorders - Recent Questions, Troubleshooting & Support
How to change clarion max570 from japanese to english
Here are general steps that you can try:
**Note: The following instructions are based on typical procedures for Clarion car audio/navigation systems. If the model or interface has changed since my last update in January 2022, or if there are specific variations in the MAX570 model, please refer to the user manual for your specific device or contact Clarion customer support for assistance.**
1. **Access the Main Menu:**
- Turn on the Clarion MAX570 unit.
- Look for a button or icon on the screen that represents the main menu. It might be labeled as "MENU" or depicted as a gear/cogwheel icon.
2. **Navigate to Settings:**
- In the main menu, navigate to the settings or setup section. This may be indicated by a "Settings" icon or a similar term.
3. **Select Language:**
- Once in the settings menu, look for an option related to language. It might be labeled as "Language," "??" (Japanese for language), or a similar term.
4. **Choose English:**
- Within the language settings, select English. If there's a list of languages, scroll through until you find "English."
5. **Confirm and Restart:**
- After selecting English, confirm your choice, and the system may prompt you to restart or confirm the change. Follow any on-screen instructions.
Remember that the exact steps and menu options can vary based on the specific model and version of the Clarion MAX570. If you have the user manual that came with the unit, it would be a valuable resource. If you don't have the manual, try searching for the user manual online using the model number of your Clarion MAX570.
If you encounter difficulties or if the menu options are not as described, consider reaching out to Clarion customer support for assistance. They should be able to provide guidance based on the specific features and interface of your device.
Clarion troubleshooting
if u care, write down your favourite radio frequencies on paper before u do this .... on bottom left there is a button, push it to remove front panel ... bend a paper clip and insert it in the hole which states reset until u hear/feel tiny click ... align right side of front panel and push left side until u hear click ... now you've cleared bluetooth pair list as well as stored radio frequencies, if u jotted down radio frequencies before this reset now u can store them again ... if it helped you, pray to God to bless me ... your welcomne :)
[email protected]
5/15/2018 7:29:41 PM •
Clarion M502
•
Answered
on May 15, 2018
Clarion nx501 with hino and password
i hAVE the same exact issue and the 4 digit password to unlock it is the last 4 numbers the HINO trucks V.I.N... they say u only get 3 tries and it locks it and the only way to unlock it is to contact clarion... lick my balls clarion the default password is 0000 and u get 3 tries but just disconnect the power and reconnect the power and BAM... you will be asked to enter a security code all over again...0000 that is your unlock code.as for the start- up HINO screen... good luck. its called a splash screen and you would have to hack clarions firmware in order to do so and i suppose if you were able to locate the internal hard drive but even then. clarion invested billions to protect their operation systems in their devices. i think the image is burned into the chip where the head unit was sent from a hino dealer brand new in a box directly to clarion's I.T. to have changed cause it comes factory as a clarion boot screen.you will also notice that the hint clarion nx501 wiring harness is altered so to make work in that truck that only comes with two front speakers.... the rear speaker leads are nowhere to be found; GONE like a new brides panties!.. you also won't have any rya leads ect.. gay gay situation and if u figure out the splash screen change let me know.peace.S.D
Not finding what you are looking for?