Casio Retail Supplies - Recent Questions, Troubleshooting & Support


Hi.
Your machine comes standard with 24 department buttons on the keyboard, and PLUs by memory location. It is hard to explain simply, but the basic idea is that a department is designed as a category key, and a PLU (Price Look Up) is designed for specific items with an attached price. As your machine has a pricing function for departments, you really don't need PLUs on such a simple machine.
What I'm really saying is the keyboard has departments on it which can be set with a name and price so that they can be one touch buttons to bring up name and price with a touch, or you can have them open price (where an item has no preset price, so you type the price each time). If you need a lot more than 24 item buttons, you will have to do the rest by code numbers, as this is only a basic machine.
Just let me know how many items you wish to enter into it, and I'll tell you how to program it.

The tables you are referring to with a+b=c etc. are the machine features, or system programming. These are the important settings that tell the machine what things to print, how the function keys will operate, security settings etc. These are mainly for us dealers, as they are written in tech speak as you can see. I don't recommend changing any of them unless you need to, as you can get into a mess. If you tell me anything that doesn't work how you would like, I can help you to set the machine features where necessary.

Casio Parts Cash... | Answered 3 days ago


Hi.
This is very serious. It means the register is about to completely clear everything (or may have done so already). If it has been sitting for a long time without power, or new out of the box, then this is normal. We can try to jump it back out of the init mode.

Follow these steps very carefully:

Turn the power off at the wall.
Turn the key to PROGRAM mode.
Hold RECEIPT FEED button down.
Turn power on at wall.
When you see the display change to 'FFFFFFFFFF' let go of RECEIPT FEED.
Press SUBTOTAL

Turn the key back to REG mode and try it. If you get error 8, then you may need to log a clerk back on.

Let me know if you have problems.

Mark

Casio Parts Cash... | Answered on Sep 15, 2018


First you must turn on the bottom message printing

program 3

address 2122

set D6 to 3

Bottom Message word programming

LINE 1 address 0932
LINE 2 address 1032
LINE 3 address 1132
LINE 4 address 1232


Casio TE-2200... | Answered on Aug 16, 2018


If you have that on the display, the FC reset was successful. it should have printed out a receipt at the same time. Now you turn the key back to REG and the lockup that you were trying to clear should be gone.
-----------------------------------------------------------------------
If anyone needs a manual for a Casio TE-2400, the programming manual is here:http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html

Casio Parts Cash... | Answered on Aug 04, 2018


Comment je programme les taxe de tvq 5% et tps 7.5 % pour le québec sur ma caisse casio pcr-t275

Casio Parts Cash... | Answered on Jul 06, 2018


Do you mean a product name, or the message at the top of the receipt?

Casio Parts Cash... | Answered on Jun 11, 2018


You need to finish the flag clear.
Turn key to PROGRAM mode. Turn power off at wall. Hold RECEIPT FEED down - keep your finger on it. Turn power on at wall. Wait 5 seconds, then let go of RECEIPT FEED. You should see "FFFFFFFFFF" on display. Press SUBTOTAL. Wait for print out. Turn back to REG mode (you may need to sign back on)

Casio Parts Cash... | Answered on May 18, 2018


Hi. If you bought it new then your dealer should have set all of the system options for you so it is strange that the tax is not programmed. Normally you would only need to set the rate when your tax rate changes. Has it been calculating tax at all? Did it come from your dealer with a standard program in it?

Casio Parts Cash... | Answered on May 16, 2018


Hi. I'm afraid this is not a 'basic requirement' of a cash register. You are working with a very complicated area of cash registers that only the medium to high end machines can even do. If you are getting stuck already, then you will not be able to work out the more complex batch processing areas of scanning either.
Your dealer should have setup the majority of this for you before you left their store (especially the keyboard layout issue and keysheet for the keyboard), then you would normally receive extensive training if you are going to be making program changes yourself in future.
You will need to learn about the difference between flat PLUs and scanning PLUs, 'Not found PLUs' like you have run into so far, then deletion techniques, PLU status programming, manual entry using OBR method etc. The book is only a guide to what you should have learnt during training. You really need to go back to the dealer and get a training session. They should be able to sort out all of these problems for you. It will take a one on one demo to fully train the ins and outs of full scanning systems.

Mark

Casio Parts Cash... | Answered on May 08, 2018


Hello!

Here is the manual to this cash machine.
Hope it will help!
https://manualsbrain.com/en/manuals/1193002/?page=86

Casio Parts Cash... | Answered on Jan 09, 2018


How do I reset the cash register?


116ER, 117ER, CE2300, CE2350, CE2400, CE280, CE285, CE300, PCR202, PCR204, PCR308, PCR408, PCR350, PCR355, PCR360, PCR365, PCR450, PCR460

This will erase all information - Remove AA batteries and unplug register from wall for 15 minutes.*

If resetting does not work this indicates issue is repair level.

PCRT465, PCR465A, PCRT2000,

This will erase all information - with the PGM key at Off press and hold down the Feed button, while holding the Feed button turn the PGM key down to the PGM mode Release the Feed Button ----INI should appear or a group of 8 zeros

If resetting does not work this indicates issue is repair level.


PCRT470, PCRT480, PCRT48S, PCRT2100, PCRT220S

This will erase all information - with the PGM key at Off press and hold down the Feed (journal) button, while holding the Feed button turn the PGM key down to the PGM mode Release the Feed Button ----INI should appear or a group of 8 zeros, now press one of the below

22500 Subtotal (PCRT40, 480, 48S)

Or

23000 Subtotal (PCRT2100, 220S )

Wait for a receipt to print.

If resetting does not work this indicates issue is repair level.

Casio Parts Cash... | Answered on Dec 13, 2017


It means printer error. Make sure you don't have paper jammed in the printer, then turn off and on at the wall. -------------------------------------------------------------------------------
If anyone needs a Royal 435dx manual, try here:
http://the-checkout-tech.com/manuals/cashregisters/royal1.php

Casio Parts Cash... | Answered on Nov 25, 2017

Not finding what you are looking for?
Casio Logo

2,995 questions posted

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1797 Answers

jackcity
jackcity

Level 1 Expert

34 Answers

tomferryman

Level 1 Expert

43 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...