The Canon IR C3226i MFP does not print, it issues an error code E000003-0006. What does this mean?
- Error E0003-0006
- Description: Center Thermistor low temperature detection at printing
In the period from printing to last rotation, Main Thermistor 2 detected a temperature of 80 deg C or lower for more than 1 second.
- Remedy: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above remedy work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR
What is the cause of the noise in my Canon iR 2230 copier machine when powered on?
When a Canon iR 2230 copier machine produces noise upon power-on, there can be several potential causes for this issue. Here are a few possibilities to consider:
- Paper jams or obstructions: Check for any paper jams or foreign objects inside the copier. Even small bits of torn paper or debris can cause mechanical issues and produce noise during startup. Carefully inspect the paper path, paper trays, and other areas for any obstructions and remove them if found.
- Misaligned or worn-out gears: Over time, the gears in the copier can become misaligned or worn, leading to noisy operation. If the noise seems to be coming from the internal components of the copier, it's possible that one or more gears may require realignment or replacement. This typically requires the expertise of a trained technician.
- Faulty or worn-out components: Other components within the copier, such as the rollers, belts, or motors, can also contribute to noise issues. If any of these components are faulty, damaged, or worn-out, they may generate unusual noises during startup. A professional technician can inspect and identify the specific problematic component for repair or replacement.
- Improper installation or loose parts: If the copier was recently serviced or had any components replaced, it's worth checking if everything is properly installed and tightened. Loose parts or improperly installed components can result in vibration or noise during power-on. Carefully inspect the copier for any loose screws, clips, or panels, and ensure that all parts are securely in place.
- Internal mechanical issues: In some cases, internal mechanical problems can cause noise during startup. These issues may require a thorough examination and repair by a qualified technician. Internal mechanisms, such as the fuser unit or drum unit, can develop problems over time that contribute to noise generation.
I have a Canon IXY digital 930 IS camera and its FUNC.SET. button(aka ok button) is not working and i want to reset the camera because all functions aren't working properly.so how to reset the camera.
To reset your Canon IXY Digital 930 IS camera, you can follow these steps:
- Turn off the camera: Make sure the camera is powered off.
- Locate the menu button: On the back of the camera, you should see a button labeled "MENU." This is typically used to access the camera's menu settings.
- Press and hold the menu button: With the camera powered off, press and hold the MENU button for a few seconds.
- Power on the camera: While still holding the MENU button, press the power button to turn on the camera. Continue holding the MENU button until you see the camera's menu screen.
- Reset the camera: Once the menu screen appears, navigate through the menu options using the arrow buttons on the camera. Look for a "Reset" or "Factory Reset" option. The specific location and wording may vary depending on the camera model. Select this option to initiate the reset process.
- Confirm the reset: The camera will likely prompt you to confirm the reset action. Follow the on-screen instructions to confirm and proceed with the reset.
- Wait for the reset: The camera will perform the reset process, which may take a few moments. Once the reset is complete, the camera settings should be restored to their default values.
How to fix canon autoref thermal printer not printing
There are several possible reasons why a Canon autoref thermal printer may not be printing consistently. Here are some troubleshooting steps that can help fix the issue:
1. Check the paper roll: Make sure that the paper roll is adequately loaded and aligned. If the paper is not loaded correctly, it can cause the printer to stop printing. Also, could you check if the paper roll is the correct size and type, as the printer's manual specifies?
2. Clean the print head: Over time, dust and debris can accumulate on the print head, causing it to malfunction. To clean the print head, turn off the printer and unplug it from the power source. Then, use a soft cloth or cotton swab dipped in alcohol to gently clean the print head.
3. Check the power supply: If the printer is not receiving enough power, it may not function properly. Ensure the power cord is securely plugged into the printer and the power outlet. Also, check if there are any loose connections or damaged wires.
4. Update or reinstall drivers: If none of the above steps work, try updating or reinstalling the printer drivers. Go to Canon's website and download the latest drivers for your printer model. Follow the instructions to install them on your computer.
If none of these steps work for you, you can contact Canon customer support for more help.
Canon powershot A530 gives me memory card error works with my 16Mb SD card but not with my new 2GB SD card
If the original card works this could be an issue with the card itself. If you can, connect the 2Gb to a computer and see if it still gives you problems. While you have it connected 'Format' it. This is basically resetting the memory card. Try this.
Connect the card to the computer. Open the File Explorer, (the little folder shaped icon), at the very bottom left of the screen. The memory card should be listed in the box on the left side. Right click the card, (press the Right mouse button once). Another box should appear with a list including the word 'Format'. Click it and follow the instructions. When finished use the same Right Click method and 'Eject' the card. This just tells the computer your removing the card. Retry it in your camera.
Could not stsrtup under the current enviroment
The error message "Could not start up under the current environment" typically indicates that the driver you are trying to install is not compatible with your current operating system or system configuration. To resolve this issue, you can try the following steps:
1. Check System Requirements: Ensure that you meet the minimum system requirements specified by the Canon driver for your operating system. Check the driver's documentation or the manufacturer's website for compatibility information.
2. Verify Driver Version: Confirm that you have downloaded the correct driver version for your Canon photocopy and printer model. Drivers are specific to each printer model and may vary. Ensure that you have selected the correct driver for your exact model number.
3. Run Compatibility Troubleshooter: Right-click on the driver installation file and select "Properties." Navigate to the "Compatibility" tab and click on "Run compatibility troubleshooter." Follow the on-screen instructions to let Windows automatically detect and apply compatible settings for the driver installation.
4. Update Operating System: Make sure your operating system is up to date with the latest patches and updates. Sometimes, newer drivers require specific updates to be installed on your system. Check for updates using the built-in Windows Update feature or the update utility for your specific operating system.
5. Disable Antivirus/Firewall: Temporarily disable any antivirus or firewall software running on your system. Sometimes, security software can interfere with driver installations. Once disabled, attempt to install the driver again and see if the error persists.
6. Contact Canon Support: If the above steps do not resolve the issue, it is recommended to contact Canon's technical support for further assistance. They can provide you with specific troubleshooting steps or alternative driver options based on your printer model and operating system.
Remember to download drivers only from official Canon sources or reputable websites to ensure their authenticity and avoid potential security risks.
Tengo una Copiadora Canon IR 1023, a cada rato se atasca el papel, se queda al pasar por el rodillo del termico no sale, se arruga y atasca.
Si tu copiadora Canon IR 1023 se atasca constantemente con papel y se arruga al pasar por el rodillo t?rmico, aqu? hay algunas soluciones y pasos que puedes intentar:
1. Verifica el tipo y la calidad del papel: Aseg?rate de utilizar papel de calidad y del tipo adecuado para tu copiadora Canon IR 1023. Utilizar papel de baja calidad, h?medo, arrugado o demasiado grueso puede causar atascos.
2. Limpia el rodillo t?rmico: Si el rodillo t?rmico est? sucio o presenta residuos de tinta o polvo, puede provocar atascos de papel. Apaga la copiadora, desench?fala y deja que el rodillo t?rmico se enfr?e por completo. Luego, utiliza un pa?o suave y limpio ligeramente humedecido con agua para limpiar cuidadosamente el rodillo t?rmico. Evita usar productos qu?micos agresivos o solventes, ya que pueden da?ar el rodillo.
3. Revisa las gu?as de papel: Aseg?rate de que las gu?as de papel est?n correctamente ajustadas seg?n el tama?o y la orientaci?n del papel. Las gu?as mal ajustadas pueden causar atascos y arrugas en el papel. Ajusta las gu?as cuidadosamente para que est?n en contacto suave pero firme con el papel.
4. Verifica y limpia los sensores de papel: Los sensores de papel son peque?os dispositivos que detectan la presencia y el movimiento del papel dentro de la copiadora. Si estos sensores est?n sucios o defectuosos, pueden causar atascos y otros problemas. Consulta el manual del usuario de tu copiadora para localizar los sensores de papel y c?mo limpiarlos adecuadamente.
5. Realiza un mantenimiento regular: Programa un mantenimiento regular con un t?cnico autorizado de Canon para verificar y limpiar los componentes internos de la copiadora. Un mantenimiento adecuado puede ayudar a prevenir atascos y otros problemas.
Si los problemas de atascos de papel persisten a pesar de seguir estos pasos, ser?a recomendable contactar a un t?cnico especializado de Canon o al servicio de atenci?n al cliente de Canon para obtener asistencia adicional. Ellos podr?n proporcionarte soluciones espec?ficas para tu modelo de copiadora Canon IR 1023 y brindarte un soporte m?s detallado.
COL INK VOLUME UNKNOWN MESSAGE
Something that worked for me, I opened the Conon MX310. took out both cartridges, and for 10 seconds I held the Reset. put the cartridges back in, closed the lid, and again, for another 10 seconds held the reset. SLOW seconds. this reset, ink levels recognised,, and it's working as it should be.
Regards
Shane (AKA Reef_Lex)
Video transfer
you can't do that, you need converting software such as, Adobe Premiere or Pinnacle or something similar that will allow you to download the vob and make your own movie to burn onto a larger dvd.
Not finding what you are looking for?
