Trunki USAhttps://trunki.com > apps > help-center
I've lost my strap, can I get a replacement? You can purchase a spare or replacement Trunki strap in a colour of your choice here. Every Trunki comes with ...
MAN Errorshttps://www.manerrors.com
Every problem on MAN vehicles is diagnosed on the instrument panel using a lamp and a code. A warning light indicates a group of errors, while a fault code ...
Baby Einstein does not have a section for replacement parts or instructions on their website. Baby Einstein works with manufacturing partners to produce their products. Contact Baby Einstein using the number below and they will direct you to the proper manufacturing partner.
1-800-230-8190
Question edited for clarity. It looks like it is made by Gemmy.
Question moved to Gemmy category.
Is it this one?
The problem with Gemmy is that 12 months after a release they cease all support as though it never existed!
Please don't just replace items, "because you might as well and it MIGHT fix it".
There is very little practical help, but a few observations and guesses. Does it really have a battery pack? If so they will likely be rechargeable batteries, or you can add a set of Lithium Energizer. However in my experience they are not battery powered but have a mains adapter and a lead. I can guess the lighting, would guess there is a bulb and a motorised colour wheel and a bunch of fibre optic cables going from the base up the pole to the sign. If the 'bulb' is an LED Module, that will be harder, but an incandescent bulb can be tested with a multimeter.
Or take it to a local model shop, they will know a Gemmy repairer.
https://www.google.com/search?q=Gemmy+5ft+fiber+optic+north+pole+sign
..
Take it to a local model shop. They will know someone that fixes them. The company assumes no responsibility after the products are launched and don't do repairs.
There is no On/Off switch on the train. Power goes from wall plug to transformer, then from transformer to track clip, which must be attached to the track. A control line goes from the track clip to the controller. Mine has a green light just above the red On/Off button that will come on even if the engine and tender are not on the track. The tender does all the work, and must be connected to the engine and on the track. There are four sliding contacts between the tender wheels that provide contact with the track.
take away the globe from the top magnet, then use your two hands to hold the globe, gradually close to the top magnet, pls note the floating distance is about 2cm, when you feel the balance, release your hands gently, finally, you succeed in floating it well. Congratulations!
Unfortunately this is not really fixable, there is no schematic available or anything like that... if anything you can attempt to contact the manufacturer directly and get the information and possibly parts.
Is this a Thinkway Woody Doll, or an actual Disney item, or who makes it?
Hola Alberto Ruben o Marcelo Pablo, Por favor estoy necesitando el manual mykit 150 o 200, por favor, podrian indicarme de donde bajarlo o enviarmelo en formato digital? Muchas [email protected]