Televison & Video - Page 2 - Recent Questions, Troubleshooting & Support


1. Make sure AC power is on at the wall socket. Check your circuit breakers to see if one is tripped that allows power go to the wall socket.
2. Check your TV power cord and plug in to take sure the cord is not broken or damaged and that it is properly plugged into the TV.
3. If you are using a remote, replace the battery and see if the TV starts to respond to the on off button.
3. I assume you get nothing on the TV, pressing the menu button does not show the menu. If you do get something, try reprogramming the remote.

Televison &... | Answered 5 hours ago


Try doing the auto scan first to get all the possible channels.. Usually the Add/Delete function applies once the TV knows what channels are out there to add or delete.

Emerson EWC1303... | Answered 5 hours ago


What are you trying to connect?

Televison &... | Answered 5 hours ago


I hope you got a warranty. You can bring it there.
Quick Look at Whoer net Free Web Proxy IP Checker Whois Tool

Audiovox fpe... | Answered 6 hours ago


Fixya doesn't, but you can try Googling (Supersonic)(SC-611)(manual) without parens.

Supersonic... | Answered 6 hours ago


It sounds like your power source module is defective. I suggest you try to replace it from one your might find at a second hand store. Look on the back side of the power source device. It should list the output voltage (usually DC or direct current as opposed to AC or alternating current) and also lists the current in amps that it produces. Also inspect the connector to your TV so you can try to match the connector when you buy a replacement. Armed with that information (output voltage and current ability from the power source) pick through the modules you find at a second hand store. Make sure the voltage exactly matches. You can also purchase a power module which can produce more amps of current, but never less. If you are successful in finding a match, buy it - but you may need to cut off the old connector and some of the wire that plugged into your tv so that you can reuse the connector on the used unit you just bought. You will need to splice the old wires from the tv connector to the wires coming out of the used power unit. Assuming the connector on the used unit you purchased did not match your tv connector, you will also need to cut off the connector and splice the tv connector to the wires coming out of the used power unit you just bought. If this is too complicated, go to the manufacturer and try to buy a replacement or look at other places like eBay for a matching power unit to the original TV unit.

There is a possibility your TV itself has a short and is defective, although from you comments I think it is more likely you power source unit.

Astar LTV-1701... | Answered 6 hours ago

Not finding what you are looking for?
Televison & Video Logo

626,276 questions posted

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74666 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...