Science & Laboratory - Page 8 - Recent Questions, Troubleshooting & Support


Downloads and install the appropriate driver software from Digital Blue:


QX5/Smithsonian Computer Microscope Drivers for WIN ME, 2000, XP, Vista 32-Bit

Download Drivers


QX5 V2 Computer Microscope Drivers for Windows Vista 64-Bit

Download for Windows Vista 64-Bit


QX5 V2 Computer Microscope Drivers for Windows 7

Download Windows 7 32-Bit

Download Windows 7 64-Bit


QX3, QX5 V1, QX5 V2 Computer Microscope for Mac OSX 10.4-10.6

Visit Webpage for Download

Digital Blue QX5... | Answered on Feb 12, 2017


never heard of a hello scope .

Science &... | Answered on Feb 02, 2017


There is a faulty capacitor on the bottom of the drive PCB, replace it (800nF 1000v) along with the drive PCB input fuse (3 amp)

Misonix... | Answered on Jan 19, 2017


The battery is soldered to the CPU. People from Zeiss Germany said that it needs to replace all the CPU. Now a days there is no longer spare parts for that instrument. I recommen you just change the day and time each time you turn it on

Zeiss Science &... | Answered on Jan 05, 2017


SADLY Stryker seems to use their service and "manuals "
sections to FURTHER ADVERTISE their EQUIPMENT...

I was hoping to find, 10W oil, dextron... etc...
(but alas.. I found NOTHING (sorry)).

Contact them directly at

Phone:
800-STRYKER (787-9537)
Option 1 for Field Service
Option 2 for Tech Support Fax:
866-787-9095
Email:
medservicedesk@stryker.com

Stryker... | Answered on Dec 23, 2016


Hi,

I will try to help, but ?

Why do you need to do this would be the first question ?

A lot of maintenance can be carried out without dismantling the unit.
Their are also lots of special techniques for free jammed parts without a full strip down ?

email yvonne@ukmicroscopy.co.uk and let her know what the issue is and the engineers will discuss it with you for FREE before your start ( IF you want to of course)

1st Rule : As a general rule, everything is fixed with either grub screws or screws, most are small and some are hidden under caps or labels

2nd Rule : DO NOT use cheap or inappropriate tools : you will damaged the instrument and then someone like us has to drill them all out at substantial cost.

3rd Rule : LInt free high quality cloths, propanol only for glass and lenses.

4th Rule : TAKE PICTURES of everything as you dismantle it so you have a visual record of the project

Lower housing around the bottom lense will normally screw off, however it will be secured with grub screws or screws so you will need small alan keys or screwdriver to remove. They screws do not have to be taken out completely.

The eyepiece tubes will also screw out , but again check for screws and grub screws acting as locking nuts.

The main focus knobs, normally have a plastic cover at the end that needs to be taken off and you will find compression fittings with either a grub screw , knut or screw . these need to be removed and pulled off, gently but be firm.

The main body should be screwed : Remove again with a high quality x driver (Phillips) (It will not be a PZ head for the screw)

Question is now what ??

Hope it helps

Olympus Sz3060... | Answered on Nov 28, 2016


Error E3 on my de humidifier kenmore 129-25805

Kenmore Science... | Answered on Nov 22, 2016


Did you ever get an answer. I, too need a pin-out of J6 to connect to a chromatography data system. Thank you

Varian Cp-3800... | Answered on Nov 16, 2016

Not finding what you are looking for?
Science & Laboratory Logo

2,371 questions posted

Ask a Question

Usually answered in minutes!

Top Science & Laboratory Experts

Tom Chichester

Level 3 Expert

47105 Answers

ray gallant

Level 3 Expert

52929 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

22091 Answers

Are you a Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...