Science & Laboratory - Page 2 - Recent Questions, Troubleshooting & Support


George tang ,,,, here is drive.. follow the link
download and run in your system
with regards
it will look like so

Aigo GE-5 Driver Created by Olli Niemitalo on 2014-01-31, last modified 2014-01-31
I bought an Aigo GE-5 microscope years ago. If someone needs, here is the driver for it.
GE5-mikroskooppi.zip
Thanks to Pauli for salvaging this from the CD my CD drive could no longer read.


http://yehar.com/blog/?p=3468

Science &... | Answered on Jun 23, 2018


Request the service manual directly from Abbott.

Science &... | Answered on Jun 21, 2018


i have the manual and the belt, pls contact at memoinstal@bol.com.br

marcelo

Zeiss Humphrey... | Answered on Jun 20, 2018


The problem is in the mainboard, look for j conectors, and try to see if any is released.They control the step motor who can make the camera focus

Zeiss Humphrey... | Answered on Jun 20, 2018


This is a brand name, not a specific device and model. That said, here is a page describing mode switch in the setup screen using the touch screen for a specific device. I assume a touch screen would have an icon for turning a device off.
Zeiss HUMPHREY 720i User Manual System Setup

Zeiss Science &... | Answered on Jun 16, 2018


You can get assistance from Sheldon Labs
Email: support@sheldonmfg.com
Phone: 503-640-3000 ext. 2407

VWR Sheldon 2310... | Answered on Apr 03, 2018


But a new scope. Having the crosshair reseated will cost you more than getting a new BSA scope.

Science &... | Answered on Apr 03, 2018


You need to replace the belt that drives the elevator gear from the joystick.
If you need help with this feel free to call or email
Andrew@premierop.com
815.325.5838

Zeiss Humphrey... | Answered on Apr 03, 2018


Manuals are available from PHC. Email service@us.phchd.com or call Technical Support at 800-858-8442 ext. 48299.

Science &... | Answered on Apr 03, 2018


Disconnect the main power. Wait 5 minutes and then reconnect power. Door lock will release. If this doesn't work, the locking relay needs replacement.

Beckman J6B | Answered on Apr 03, 2018


Check the fuses located on both sides of the mains connection in the back of the autoclave. One of them has blown. If both check ok, then check the connection tho the mains. You may have a faulty ground. If you are not comfortable doing this, contact Eschmann at tel:+44 (0)1903 753322
Fax: +44 (0)1903 875789
info@eschmann.co.uk

Science &... | Answered on Apr 03, 2018


I have a copy for Windows 7 32 bit. You can download it from
https://drive.google.com/file/d/1Y650G_x6m6Efk8n6P5xQKBHvrMuIV8yc/view?usp=sharing

Digital Blue... | Answered on Mar 27, 2018


If you're clever with electronics and can solder, consider an LED replacement. Do you have any data on the voltage, current, or lumen rating of the bulb?

Science &... | Answered on Mar 25, 2018


I know nothing about the device, but it reads like you forced the door into a wedged position and it's stuck there. I would gently pry at it to get it past the "wedge", then study the mechanism to see whether the actual latch is broken, or just out of position.

Please click the Comment link to respond.

IEC Centra-MP4... | Answered on Mar 21, 2018

Not finding what you are looking for?
Science & Laboratory Logo

2,371 questions posted

Ask a Question

Usually answered in minutes!

Top Science & Laboratory Experts

Tom Chichester

Level 3 Expert

48579 Answers

ray gallant

Level 3 Expert

54483 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

22820 Answers

Are you a Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...