Photography - Answered Questions & Fixed Issues


My picture frame works with the slower cards only. My game camera only works with the faster chip. Now that you know what it works with, buy a 2.0 of higher capacity. I am pretty sure you cannot make it work with the faster card.

Quantaray 7-Inch... | Answered 9 minutes ago | 81 views


Some Laptops have the ability to automatically rotate pictures based on certain criteria. Being as you now know the pictures are sideways, simply rotate them in most any graphics program, and save them with a different name. (I usually use something like HPIM2345.JPG and the new name would be HPIM2345a.JPG. I do this so I still have the original in case something goes wrong. I go through the whole batch from my camera or phone, rotate as necessary, and once I am sure they are OK then I delete the original.

Photography | Answered 31 minutes ago | 17 views


Two possible causes spring to mind :
1) You may not have undone the release sufficiently for it to move freely
2) There may be grit or other foreign matter trapped in the bearing. If you can take it apart, you should be able to clean the contact surfaces and re-lubricate it before re-assembly.

Photography | Answered 9 hours ago | 15 views


You need to edit them for the correct orientation on your computer, before you download them - there is no capability in the frame to retain the data.

Photography | Answered 9 hours ago | 26 views


Probably not, but I would imagine you would need a lens

Mamiya 645 Pro... | Answered 2 days ago | 66 views


Since they're only $20 each, repair would be prohibitive. Just replace them, maybe with something a little sturdier.

Westinghouse 7"... | Answered 2 days ago | 74 views


Sounds as if you are merely loosening it on the centre column. You need to slacken off the horizontal control, usually near the panning handle.

Photography | Answered 3 days ago | 21 views


It is unusable because it is 'broken'. You've not specified the make and model, but if it was a cheap one (under £500) just replace it.

Canon... | Answered 3 days ago | 32 views


possibly you have a friction padded roller instead of spikes place enough film on roller to overlap and then close camera

Lomo Photography | Answered on Dec 09, 2017 | 689 views


CONTACT FUJI not fixya they have warranty .

Photography | Answered on Dec 09, 2017 | 51 views


listing what camera you are asking about might be a big help when asking a question here at fixya. please re ask your question separately

Photography | Answered on Dec 08, 2017 | 26 views


Whatever the actual subject matter of this query (which is a little unclear from the way it is worded), it does not appear to relate to a camera.

Photography | Answered on Dec 06, 2017 | 32 views


Purchase a new film, take some photos. Remove the used film and get it developed.
If the pictures are good, it works.

Kodak... | Answered on Dec 05, 2017 | 36 views


Clean the PCB (printed circuit board) check all the connectors and the circuit's internal connections whether it is OK or not if there is some loose or stain then try to reconnect the same and clean all the parts easily with a brash then the problems will not occur

Photography | Answered on Dec 05, 2017 | 40 views


So you have told us, repeatedly. Please be more specific about the 'top accessories' to which you refer.

Photography | Answered on Dec 03, 2017 | 26 views


Not sure if this will solve the problem but you could try here http://www.cameraspareparts.co.uk/

Linhof... | Answered on Dec 03, 2017 | 239 views


Make sure the SD card switch is on/open if the problem continues and it is still in warranty return it for a replacement or repair.

Westinghouse... | Answered on Dec 03, 2017 | 101 views


Check the magazine spring; the weapon was probably stored with ammo in the mag, and the spring has lost its elasticity. Try a different mag and see whether it resolves the problem. Other possible issues: inadequate lubrication, a rough spot on the breech block that's catching the cartridge, or carbon buildup immediately inside the breech.

Sanford MARK II... | Answered on Dec 02, 2017 | 391 views


Try contacting Konica Minolta - if not joy, then your local friendly camera shop may be able to help.

Minolta... | Answered on Nov 30, 2017 | 36 views


You need to try 000 and if that does not work look on youtube for how to open that lock.

Samsonite... | Answered on Nov 21, 2017 | 47 views

Not finding what you are looking for?
Photography Logo

Ask a Question

Usually answered in minutes!

Top Photography Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Brad Brown

Level 3 Expert

16174 Answers

Are you a Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...