Motorsports - Answered Questions & Fixed Issues


Roundup or 2-4D should do the job for you. You can always make sure by asking the agent at the store where you buy the product. Lowe's, Home Depot, etc.

Thor Bomber... | Answered on Oct 29, 2018 | 118 views


Once you have disassembled the motor and pulled the armature from the field windings you will need to have an ohm meter. Set the meter to OHMS and then touch the red lead to the winding lead on one end and the black lead to the winding on the other end and if the windings are still good you should be a 0.00 reading or very close depending on the resistance. The reading should be close to the same as touching the red and black leads together. This means that there is a complete circuit end to end and the winding is not broken. IF the meter does not give you that reading you will have a broken winding.

Motorsports | Answered on Oct 29, 2018 | 76 views


Try watching this video to see if it is something that you would be able to tackle by yourself. https://www.youtube.com/watch?v=TXsFGv77Ue8

Thor Bomber... | Answered on Oct 29, 2018 | 114 views


Check all fuses and if good you will have to pull the covering from the rear hatch to get at the wires so you can check with a test light or volt meter to see that you are getting voltage when the wiper switch is activated. If there is no voltage try to see if the wire is damaged somewhere or if the switch itself has gone bad. If there is voltage them the motor may be burned out. You will have to have the things that you find replaced if bad.

Motorsports | Answered on Oct 29, 2018 | 118 views


The home heater setting will depend on where you live. If you have freezing temperatures, I would not set it below 40 degrees. A heater in the crawlspace itself should be one that has a setting that will automatically turn it on at no lower than 30-40. Usually they will have a turn on temp and a shutoff temp that is set by the manufacturer. Make sure you have all pipes in crawl space insulated and if there are exposed pipes in the crawl space I would definitely put the heater close by or use heated pipe tape and try to insulate them to keep from having any freezing. Be sure to close all foundation vents for the winter to keep the cold air out and then open them again in the spring to allow for cross thru ventilation.

Thor Bomber... | Answered on Oct 29, 2018 | 115 views


Hi, Steve, I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH---WHINE
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Cam Chains---CLICKIT
5. Clutches---CHATTER
6. Cylinders---PING
7. Fairing Panels---WHISTLE
8. Fenders---SCRAPE
9. Fronk Forks---Plunk
10. Fuel pumps---WHIRR
11. Gears---WHINE
12. Head Gasket---HISS
13. Hydraulic Lifters---TAP
14. Instrument Clusters---BUZZING
15. Kick Starter---GRINDS
16. Pistons---SLAP
17. Power Valves---CLINK & RATTLE
18. Radiators---GURGLE
19. Rear Chains---RATTLE
20. Rear Shocks---SQUEAK
21. Relays---CLICK&BUZZ
22. Shaft Drives---WHIRR
23. Shifting Trans---CLUNK
24. Solid Lifters---TICK
25. Speedometers---bzzz
26. Starters---CLICK
27. Starter Clutch---GRIND & WHIRR
28. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Scooter Troubleshooting Scooter won start All about Scooters Tao Tao ATV wont start Fix it here
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
https://www.taotaopartsdirect.com/collections/lancer-150
TAOTAO QUANTUM 150 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


TaoTao... | Answered on Apr 28, 2018 | 270 views


When a municipality has a Water Main break the work that follows introduces so much debris into the adjacent lines that most filters are coated, overwhelmed and can't stop the sludge that is being forced through them and you will find the harder compounds, ie: calcium deposits, concrete particles & actual rock debris, although microscopic in size, in the water control solenoids of the new appliances we have today. It only takes one tiny little hard particle to jam the plunger in a solenoid and stop it from opening or closing. I feel confident in saying that your machine is not damaged but the clean-out of it may require a Technician that the City is Libel for paying, to fix your machine if the task is too complicated for your skill level. As with any new machine, cut all power to it and let it rest for ten minuets before powering back up to allow it to run it's own diagnostic troubleshooting program. It might give you a Fault code that will tell you exactly what's wrong and it could even clear the fault itself. I hope that helps.

Red Defy Helmet... | Answered on Mar 26, 2018 | 301 views


Hi, Bob for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Amazon com Poweka New 39mm Air Filter Gy6 Moped Scooter Atv Dirt Bike...
TaoTao 50cc Scooter DIY Air Filter Replacement PT 1
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
TaoTao Scooters Mopeds Parts
TaoTao ATM50 A1 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


TaoTao... | Answered on Mar 01, 2018 | 593 views


menu\
Control Panel\
All Control Panel Items\
Backup and Restore\
then choose "RESTORE COMPUTER TO EARLIER TIME' and follow dialog. If system requires to make backup first then authorise it to make backup, you may need it later.

Replay XD 1080... | Answered on Feb 06, 2018 | 354 views


consider the condition of your lens cleaner as compared to your disks. if your disks are more scratched than your lens cleaner disk then replace your disks, if not replace the lens

Fly Racing... | Answered on Feb 06, 2018 | 650 views


If my memory serves me correctly the dash needs removed (hard work) and work then easy

Motorsports | Answered on Feb 04, 2018 | 313 views


Sounds like main wash switch is bad for wash cycle.

Red Defy Helmet... | Answered on Feb 04, 2018 | 381 views


great mercadolibre com mx http://www.soccerphysicsonline.com/

Motorsports | Answered on Jan 15, 2018 | 411 views


My first question is, can the engine idle ok. If yes, then cutting out at intersections may well be heat soak from the engine boiling off the fuel in the float chambers. Try fitting anti-percolating blocks between the inlet and the carburetor mounts. These are red fibrous blocks machined to the same tolerances as the carby bases.

Bikemaster... | Answered on Dec 02, 2017 | 406 views


for communication

Thor Bomber... | Answered on Nov 22, 2017 | 669 views


search here:
http://www.ricoh-imaging.co.jp/english/support/

Thor Bomber... | Answered on Oct 08, 2017 | 388 views


According to Wikipedia, he dies 11-March 1942

Thor Bomber... | Answered on Oct 08, 2017 | 397 views


Check for a bad fuse..not sure where it is but look in the owners manual or inside cover of the fuse panels for the wiring diagram

Motorsports | Answered on Sep 14, 2017 | 494 views


Hello David,
There isn't much you can actually do for it,, just keep the air filter clean and treated, keep a fresh spark plug in it.. its about the best it will be like it is..

TaoTao... | Answered on Jun 19, 2017 | 765 views


The alarm you hear may be the overheating alarm... but, if it is, it won't run too long with it on before the engine locks up...Is there evidence of water coming from the witness hole in the back of the motor? Good.. otherwise,, you may be hearing the low oil alarm..or the oil pressure alarm...My bass boat oil system alarm goes off every time I crank the engine..but it uses oil and runs great...(been doing it for years - I am too lazy to clean the sensor in the oil tank)
The RPM and faster alarm is something that puzzles me?

Motorsports | Answered on Jun 14, 2017 | 495 views

Not finding what you are looking for?
Motorsports Logo

Ask a Question

Usually answered in minutes!

Top Motorsports Experts

chuck ringwood
chuck ringwood

Level 2 Expert

260 Answers

Archibald nyamukapa

Level 1 Expert

21 Answers

Steve P
Steve P

Level 3 Expert

3530 Answers

Are you a Motorsport Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...