Medical - Page 8 - Recent Questions, Troubleshooting & Support

need to clean your screens and filters.. also clean out your chamber and pay attention to the sensors there...

MDT Harvey... | Answered on Apr 10, 2017

If your power line has a two female connection, try unplugging and turning it over ( so the connections are the opposite way around ) plug it back in and try it again, sometimes the current will only flow one way and if it's wrongly connected it will cause the motor to run in reverse.

GE Medical | Answered on Apr 10, 2017

Hello. The chairs lift needs to be cleaned from the inside and the hydralic fluid changed.

Flight Dental... | Answered on Apr 10, 2017

Does Position B works? If works, then Position A is not program in. Other thing could be the calibration out

PLANMECA Patient... | Answered on Apr 10, 2017

ask a doctor

Medical | Answered on Apr 10, 2017

you need to look at the end of the operator manual.. look here on the last few pages to see exactly what on the boards needs to be checked for 220V:

MDT Harvey... | Answered on Mar 31, 2017

This manual tells you exactly what to change to make it 220/230V:

MDT Harvey... | Answered on Mar 31, 2017

Contac whomever is drawing the blood,. We are no them.

Medical | Answered on Feb 16, 2017

You really have to tell a person what you are talking about. Go to Google and type in Free online manuals, then type in whatever the make and model is of what you have.

Hope that helps!

Medical | Answered on Feb 07, 2017

If you wish to get some details; visit the site linked here. Pull up older posts.

Ecg Medical | Answered on Dec 24, 2016

If I remember correctly, that table uses an electric motor for the elevation. There are 2 possible problems. Either the down switch is sticking and the motor continues to run in the down position until it reaches its lowest point and hits the cut off switch or your electric motor needs a new brake installed. The brake installs between the motor and the actuator housing. These come apart fairly easily. For more information, or parts, call Pivotal Health Solutions @ 800-743-7738. I believe they are now the manufacturers of this table. Talk qith Quincey in parts.

Chattanooga... | Answered on Dec 02, 2016

Chiropractic is founded on the actual technological undeniable fact that the actual nerves handles the actual functionality of each cellular within the body. The actual twenty four portable bone fragments define the actual spine home as well as safeguard the actual sensitive nerves.

Medical | Answered on Dec 02, 2016

You don't say what model it is, but generally spaeaking you have to do a factory reset. Here is the procedure for a Nexus 7 for example

Apex Digital... | Answered on Dec 02, 2016

Elite is definitely controlling this market. But you can see all reviews here:

Medical | Answered on Dec 02, 2016

Since you have posted this in the section for EKG/ECG machines, I am surmising that you are referring to lower limb lead placement to decrease artifact on EKG readings. If you were my patient, I would simply move the lower limb leads up to the lower part of your torso where they would be less likely to be affected by movement from the fasciculations. It may cause a decrease in the deflection on the reading, but at least it will allow for a clearer overall "picture".

I hope this answers your question.

If your question was indeed how to cure the fasciculations themself, I would suggest discussing that with your neurologist. He or she is the only one who will have a clear enough knowledge of your whole case to be able to advise you properly.

Medical | Answered on Nov 23, 2016

Not finding what you are looking for?
Medical Logo

1,701 questions posted

Ask a Question

Usually answered in minutes!

Top Medical Experts

Brad Brown

Level 3 Expert

17326 Answers

The Knight
The Knight

Level 3 Expert

75581 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

20927 Answers

Are you a Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides