Medical - Page 7 - Recent Questions, Troubleshooting & Support

Have you eaten any clowns lately?

Medical | Answered on May 16, 2017

Your question is posted in the wrong category, but I will answer your question being that it was legibly written. No, you do not give money to any one person when you place an order on Amazon. However, you choose an item, place it in your cart, and then proceed to checkout. At that point, you must provide a form of payment such as a debit card or credit card in order to complete the transaction and have the merchandise sent to your home.

Medical | Answered on May 12, 2017

1) You have bad patient cable.
2) pins on patient cable socket broke off on amplifier PC board
3) Bad Amplifier PC Board
The most likely is bad Patient cable.

Ecg Medical | Answered on Apr 30, 2017

there are many sites and shops that sell chiropractic tables. you should figure out first of all what kind you are looking for. Here is one good site where you can personalize your table;

Medical | Answered on Apr 10, 2017

unfortunately that is the way to raise the table. it is easier to do it if the before the client is lying down on the table if possible

Bailey Hats Mat... | Answered on Apr 10, 2017

about 1/32 deep . it's not that deep , if you go to deep you'll dig the person out ... ouch !

Medical | Answered on Apr 10, 2017

If you wish to get some details; visit the site linked here. Pull up older posts.

Ecg Medical | Answered on Apr 10, 2017

the movie was not filmed in english

Medical | Answered on Apr 10, 2017

too much voltage, too much amperage, your springs may be too heavy, and the return on your armarture/contact spring should be bent just a little to help it assist forward motion in the direction of the coils. play around with the armarture height and bend your springs while trial and erroring (*******, i know it's not a word) at low voltage like 5.5-7.5 volts. if it hits hard, sounds consistent and doesn't kick back or stick you won't overheat. A better power supply may just be the ticket though. spend at least $80 bucks on one. anything cheaper will feed too much power, inconsistent power or will not feature short circuit protection so the moment a coil stick happens your PS blows. stay away from digital power supplies (the little dinky box ones that look like late 90's GPS beacons) and only run your machines momentarily while tuning, when it's tuned you should know it immediately within the first few strokes based on the sound. You should already know all of this if you are tattooing, but I wont give you heat because I know some scratchers that do better work than Kat Von D and Tomas Tomas, just saying. If you are scratching please for the love of sweet baaaaby Jesus, ONLY USE DISPOSABLES and NEVER go without BARRIER PROTECTION aka, wrap it up. - Professional tattoo artist; Brian @ Foxy Tattoos, Raleigh, NC

ART Cast Iron... | Answered on Apr 10, 2017

If you don't know the answer to this question, you have no business owning it.

ART Cast Iron... | Answered on Apr 10, 2017

Check Owner's Manual. Most likely it means IRREGULAR HEART BEAT.

Medical | Answered on Apr 10, 2017

Everything I found said it's a windows problem, virus, malware or corrupted windows system files or Dll's. first run malwarebytes the from an elevated command prompt run sfc /scannow to check windows.All else fails run vendor hardware update & then Windows updates.

Dexis DEXcam | Answered on Apr 10, 2017

Fixya is a sight for do it yourself inclined people to get advice on projects ranging from home repair to appliances etc. We don't give medical advice. Try

Medical | Answered on Apr 10, 2017

probably a bad humidity switch. Try this site:

or Google Free Online manuals for your brand

Norcold Inc... | Answered on Apr 10, 2017

SMR Solarlite Chair Mounted Procedure Light Apex Maxi Exam on eBay :

storz SMR Apex... | Answered on Apr 10, 2017

Look at this free online troubleshooting guide:

Ecg Medical | Answered on Apr 10, 2017

I copied this from an old question similar to yours:
Ekg machines print on thermal paper, This means that the impression is made by the print head heating the paper. If the print head is not making contact with the paper, you will get a faint tracing or no tracing at all. This needs to be adjust by a technician. Contec is located in China and we are a dealer. If you need their info or want us to look at it for you (for free) simply give us a call

Discount Cardiology

Contec Medical | Answered on Apr 10, 2017

Not finding what you are looking for?
Medical Logo

1,709 questions posted

Ask a Question

Usually answered in minutes!

Top Medical Experts

Brad Brown

Level 3 Expert

17448 Answers

The Knight
The Knight

Level 3 Expert

75774 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

21629 Answers

Are you a Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides