Flat Panel Televisions Repair Help & Product Troubleshooting
Family Lines:
99,355 Problems and Solutions
-
UNABLE TO EJECT DVD
Someone is going to have to open the unit up and see if disc is out of position and or the mechanism is jammed for some...
lorigarcy- May 24, 2012
- Flat Panel...
- 1 Solution
-
black spots plasma tv
If they are inside the screen nothing can be done and replacing the screen unit which is called a panel is out of reach as cost of...
christi5370- May 24, 2012
- Flat Panel...
- 1 Solution
-
blue background with vertical lines of black and...
The T'Con boar should be suspected. But before make it sure, a through check up should be done. Seek tech...
Dan Calderon- May 24, 2012
- Flat Panel...
- 1 Solution
-
how to remove advertisements on sharp aquos...
Download the user manual to your device from net and refer it. To download it, click here.
barroqueiro- May 23, 2012
- Flat Panel...
- 1 Solution
-
TV wont power up
If the power light comes on at all the main fuse is good.The places to begin---some general info: I see so many here with no...
chunster96- May 23, 2012
- Flat Panel...
- 1 Solution
-
change power supply,but screen turn on for 1...
You have to enter its service menu option, and make all suggested adjustmens there, after power board replacement. Download...
Marc Roy- May 23, 2012
- Flat Panel...
- 1 Solution
-
WHERE CAN I READ THE the screen type number for a...
If the screen unit which is in this set called a DISPLAY PANEL is bad you are finished--cost of part will exceed cost of this set...
zaki_04- May 22, 2012
- Flat Panel...
- 1 Solution
-
I've trying to log into Facebook on tv but...
Simplest solution is that change your facebook acount password then it will be fine.
bevhallpink- May 23, 2012
- Flat Panel...
- 2 Solutions
-
vizio not turning on
I see so many here with no sound/no picture issues: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check...
- mark_rich289
- May 22, 2012
- Flat Panel...
- 1 Solution
-
the screen turns off after a clicking noise after...
First is what was set doing before lamp was replaced?Also it is very easy on the Mitsubishi sets to get the lamp in wrong where...
larry tsosie- May 22, 2012
- Flat Panel...
- 1 Solution
