Electronics - Others - Page 7 - Recent Questions, Troubleshooting & Support

hi there.
this is what i have just found on the internet it might help you out but not sure.
After plugging in the device. Go to device manager (In run type "devmgmt.msc") In Device manager go to "Universal serial bus controllers" It should list the storage devices that you have connected to your PC. Right click and then click "Uninstall. Remove the USB drive and restart your system.
Try connecting the device again, I think this should solve the problem.
for windows xp
first you need to go to Device Manager by double-clicking on the System icon in Control Panel, choosing the Hardware tab, and clicking Device Manager.
go to divice manager
usb hub controler it will be at last of the list then
right click on usb hub controler open it go to usb root hub right click & go to properties
then go to device and click ok
do it 4 to 5 time it will work 100%
i have tried it and it worked
Best of luck :)
hi do one thing go to my computer right device manager ther u to o universal serial bus right click on tht option go to update driver select yes this time only give automatic k . before doing this step plz insert mother board driver cd after tht u do all this procedure thn c ur pendriv vl be dedected k
if none of the above works try this link out.
Kingston DT 1000 pendrive was not detected in computer Google Search

Transcend... | Answered on Nov 20, 2017

have you lost your photos on your memory card/USB drive?

If you appear to be a Mac user, just try this Photo Recovery app. It can nimbly recover deleted photo files, music sources and video clips from Mac hard disk drive and memory devices containing USB Drive and SD card. http://www.leawo.org/photo-recovery-mac/

Simply insert the card to your Mac and run the photo recovery app. The software may help you scan the card and then show you files it has found. Choose the pics you want to get back and hit the "Recover" button to start.

SanDisk Ultra... | Answered on Nov 20, 2017

If you have a manual for the inverter check and see ifDin there are diagnostic codes with the LEDs.


I looked through this and your description of the problem was not listed in the document, but you may be able to contact the manufacturer and get more information. Basically this is a DC to AC power conversion device, which takes the 12v DC input and converts it to 115V AC
and in does so at a maximum peak power of 750 watts at 115V AC. since your charge controller went bad, it is possible in the process it overloaded this device or the battery system put out too low of a voltage when the charge controller died and low voltage input is not something this unit was able to tolerate. Check your remaining components to be sure they are good, then look at the inverter's board and transformer to see if anything was damaged. I would want to verify the charge controller was good and the batteries in good condition - and perhaps consider replacing this inverter with one more suited to your actual load wattage requirements.

Vector VEC1047BD... | Answered on Nov 19, 2017

It may have been damaged if you carry it around with you. The most probable issue id the solder comes away from the usb plug inside the flash drive.

SanDisk Cruzer... | Answered on Nov 19, 2017

What type of TV, IE: Make and Model. If you have a SCART socket, then you can probably use the audio output connections on the SCART cable to connect to your stereo.

One thing to check is that your TV isn't muted! I know it sounds silly, but lots of people have inadvertently muted their TV's and not realized it.

Electronics -... | Answered on Nov 18, 2017

It sounds to me that you have a cable break somewhere between the armrest controls and the electronics below the seat. I am assuming this is the case as you did not mention a problem with the remote control (if this one has that). If you have a remote control, and neither the armrest or remote work, then the problem is very likely in the motor control electronics.

Acorn Stairlifts... | Answered on Nov 18, 2017

hi there.
see if this link helps you out.
computer is not reading memory stick Google Search

Electronics -... | Answered on Nov 18, 2017


Using Dissertation Research Methods

Method is how to gather and interpret research data, while methodology is a system of methods. The methodology section of a thesis entails discussion ofpossible method, of methods considered, and methods chosen and why. Methods influence the type of data gathered and explanation of methodologies in your writing demonstrates understanding of the task in hand. Data are the results of your research; they will be quantitative and also qualitative.

Tutor-imposed goals and deadlines
Choosing the topic and seeking a title
Selecting research methods
Literature searches and reading
Timetabling the stages of the project
Self-imposed goals and deadlines
Finding a title will include keyword brainstorming. This title www.writemyessay.services should express a doubt, not state a fact or pose a question. However, a question that has done at you through your previous studies may well be the foundation from which to brainstorm keywords. From a tentative title a hypothesis may begin to emerge. Thinking about what kind of research will be needed to test the hypothesis should lead to further brainstorming about the topic andclarification of wording of the title.

on Nov 16, 2017 | Proquest, Umi Dissertation...

Open lock to enable.

Kingston Combo... | Answered on Nov 13, 2017

Not finding what you are looking for?
Electronics - Others Logo

16,500 questions posted

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

16376 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides