Electronics - Others - Page 5 - Recent Questions, Troubleshooting & Support


There are two adapters for that lantern; one for the house and one for 12volt. You simply connect one of the adapters and it will power the lamp and also charge it. Those two adapters came with the lamp; if you don't have them you can contact Coleman to purchase replacements.

Coleman 8D... | Answered on Jun 01, 2018


The inverter may not be suitable for use with an inductive load such as a vacuum cleaner.

Sunforce 2500... | Answered on May 29, 2018


You would select the files and then copy them to the USB drive.

Electronics -... | Answered on May 21, 2018


This unit has a fuse for the charging circuit, which (as I recall) is accessible without removing the outside cover. Check the condition of this fuse, and replace as necessary.

Inverter... | Answered on May 18, 2018


This condition occurs when the inverter has failed due to excessive load. Usually, the inverter must be replaced once this condition occurs.

Inverter... | Answered on May 18, 2018


As the Cobra 1500w inverter is constructed analogous to a high-frequency "switching" power supply, it is not recommended to modify it to exceed original specifications. For any inverter intended for applications exceeding 2000W transient peak, it is highly recommended to use a low-frequency "true-sine" inverter. Your Cobra inverter is designed for low-deman applications, and is insufficient for high-demand applications.

Cobra... | Answered on May 18, 2018


Plug it back in to the house electrics .then search for the inverter on the trailer .

Coleman 1997... | Answered on May 11, 2018


Short answer is you can't. Its encrypted. If you could bypass the PW, it would not be very useful for protection. you may be able to format and use it as new, but not access the content on it currently at all.

SanDisk Cruzer... | Answered on May 10, 2018

Eu3000is Manual

Honda Eu3000is | Uploaded on May 10, 2018


I have a background in electronics so i hope i can help. Now after reading this i have the feeling this item does not put out 2000 watts cause if that were the case it should draw somewhere near 147amps. This is because to find out amps you need to take the 2000 watts and divide it by 13.6 volts (assuming what the vehicle runs at) that gives you amps. watts/volts=amps.

Atd Tools... | Answered on May 07, 2018

Not finding what you are looking for?
Electronics - Others Logo

16,579 questions posted

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81423 Answers

Brad Brown

Level 3 Expert

17448 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...