Water Sport - Recent Questions, Troubleshooting & Support


You can contact the store where you purchased your printer. Either you should try amazon store to collect your 3d printer parts. Specially for PLA filaments you should try 3D Printing parts supplier, because they provide various types of PLA filaments like -
  • Ultimaker 2 PLA Filament (
    flexible white,red,transparent,blue,ultimate blue and others)

SainSmart 3mm... | Answered on Jan 12, 2018


You must try to crank it by hand ,remove spark plugs so there will be little compression and then try to turn the motor it should turn without to much force this will indicate the motor has not seized when hooking up a jump start do not connect both leads directly to the battery ! the red + lead should connect to the red+ on both batteries but the neg lead - should not go to the battery post but to a ground usually directly to the metal engine cover or you can damage the battery !

Yamaha 12V Air... | Answered on Nov 25, 2017


Yes, they are exactly the same thing. Body boarding has been sometimes called boogie boarding since the invention of the boogie board by an entrepreneur named Tom Morey.

Water Sport | Answered on Sep 17, 2017


if the wear ring is installed wrong or the impeller is full of debris this will be the result. look close at the wear ring for scrape marks from the propeller OR are you missing carpet off the rungs of the trailer ?

Water Sport | Answered on Jul 14, 2017


Speedo are the best. You can see the rank here: http://blog.djsports.com/2009/10/10/top-10-swimming-goggles/

Water Sport | Answered on Jul 12, 2017


indicates that a component in the ignition circuit is overheating internally and failing
could be a coil or cdi unit or any sensors if fitted

Yamaha 12V Air... | Answered on Jun 21, 2017


The first thing to check would be the compression. As long as both cylinders are with in 10 psi of each other you should be okay. Both cylinders need to be at least 100 psi. That would be the minimum for a motor to start and run. It should read aprox- 150 -- 165 psi. Also i would check for a possible exhaust leak, that would cause the motor to bog down because the carb is breathing in the exhaust fumes. Try running the motor with the hood up to see if you have a leak.

Water Sport | Answered on Apr 25, 2017


check hull type as a freshwater hull and a sea hull are different as sea water has a higher level of buoncy .Although i doubt if you will encounter a freshwater hull but it is a thing to think about and check.Main cause though could be lack of engine power for whater reason .

Yamaha 12V Air... | Answered on Apr 24, 2017

Not finding what you are looking for?
Water Sport Logo

809 questions posted

Ask a Question

Usually answered in minutes!

Top Water Sport Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Tom Chichester

Level 3 Expert

37878 Answers

Bill Boyd

Level 3 Expert

46578 Answers

Are you a Water Sport Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...