Baby Care | 25 views | 1 helpful votes
Kidco Peapod... | 245 views | 0 helpful votes
Graco Baby Care | 582 views | 0 helpful votes
The Baby Care | 164 views | 0 helpful votes
Baby Trend... | 277 views | 0 helpful votes
Fisher Baby Care | 278 views | 0 helpful votes
Baby Care | 581 views | 0 helpful votes
Baby Care | 421 views | 0 helpful votes
Graco Sweet... | 453 views | 0 helpful votes
Simmons Bedding... | 825 views | 0 helpful votes
Simmons Bedding... | 822 views | 0 helpful votes
The Baby Care | 990 views | 1 helpful votes
In Baby Care | 843 views | 0 helpful votes
on Jul 17, 2017 | Baby Care
Baby Care | 760 views | 0 helpful votes
The Baby Care | 992 views | 0 helpful votes
Angelcare Baby... | 687 views | 0 helpful votes
The issue you are having could be caused by a number of things but the most likely is either interference from a transmitter in the same frequency range or the Monitor has a failing capacitor on the board.
If you can think back to when the issue first started and check to see if you have any new devices that might be on the same frequency range and test them by turning them off for a while to see if it continues though this would not be effective if you live close to anyone else.
If that does not work then use high quality batteries and make sure the unit is placed far away from any windows in the room also make sure any florescent lights are not in use near the unit and make sure its not next to any thing else that uses a power supply that has the square box on the plug that includes using the same outlet.
This particular device use's a low frequency range around 40mhz which can be prone to interference more then a lot of the newer units that use 800mhz to 2Gighz.
If all of the above fails you will have to replace the unit or seek repair from the manufacturer if it's still under any warranty.
Philips Baby... | 1,103 views | 0 helpful votes
964 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: