Baby Gear - Page 6 - Recent Questions, Troubleshooting & Support

I finally found my instructions!! It's actually really easy to convert to a toddler bed:
Step one: Take out four screws (two on each side) of the front railing and top bar. They are the screws holding the front railing and the top bar to the side of the crib and the dresser. 
Step two: Lower the mattress to the lowest setting. 
Step three: Place the toddler bed railing in place. It can go either way depending on which side of the crib your toddler sleeps. We put the taller part of the toddler railing closest to the dresser because that is where our son's head usually is. 
Step four: You'll need 4 1.5 inch hexagonal screws to screw in the toddler railing. After 2.5 years, I could only find two of them, so I used two 1.5 inch regular screws that came with the crib. On the taller part of the toddler railing -- the screws go into the 1st and the fifth holes. On the shorter side of the railing, the screws go into the 3rd and the 5th holes. 
That's it.. You've now got a toddler bed!

JCPenney... | Answered on Jul 04, 2018

Hi Darwin.
try asking google you might find out from there,i have had a look and there is forums on there that might help you out.

Jarvis Baby Gear | Answered on Jul 03, 2018

same problem here thats such a headachee! worst customer service even, since there isnt any!!

Baby Gear | Answered on Jul 03, 2018

Google (BSF)(model)(manual) without parens OR request the manual directly from BSF.

Baby Gear | Answered on Jul 02, 2018

Depends who manufactured them. In the UK they are made by Pedigree, within the UK.

Baby Gear | Answered on Jul 02, 2018

We have no parts locator services here, sorry

Simplicity Baby... | Answered on Jun 28, 2018

I need help taking this cover off so that I can wash it , please help.

Kolcraft Cuddle... | Answered on Jun 27, 2018

That isn't a bolt, it is a spindle with a spring grip washer on it. Only that washers is holding it. It is a cheap and nasty way of fitting something to a shaft. Put a couple of thin bladed electrical screwdrivers in the slots and lever them upwards a bit. Have someone else pull the wheel upwards whilst putting your feet on the bottom wheels.

Kinderwagon Hop... | Answered on Jun 27, 2018

Click on Download PDF to open manual for the stroller.

Note: Because model name ends in 3, it is NOT one of the many strollers recalled for safety reasons by the Consumer Product Safety Commission - be careful with other models.

Baby Gear | Answered on Jun 26, 2018

Not finding what you are looking for?
Baby Gear Logo

26,913 questions posted

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

149 Answers


Level 3 Expert

81400 Answers

Douglas Dinnebeil
Douglas Dinnebeil

Level 2 Expert

211 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides