Boss Car Audio & Video - Page 2 - Recent Questions, Troubleshooting & Support

Are the AV cords (the colored ones) plugged in all the way or in the correct holes

Bypass brake for bv9386nv boss radio

i have a boss BV9986BI when i hook it up it lights up blue but wont turn on at all

try emailing the manufacturer for directions.

It will not show that on list it can strem if BT is connected to phone https://www.bossaudio.com/manual/BV6656B_EN_UM.PDF

Either order adapters from a retailer or cut the connectors off and crimp on terminals that fit the boss speakers

Red (ignition) / Yellow (battery constant) / Black (ground).
Here is the manual
https://www.bossaudio.com/manual/BV9376B_EN_UM.PDF

Workplace harassment and bullying is a complicated subject. If you know the boss and the kind of working relationship they have with your area manager, you will have to determine whether you should speak to them directly behind closed doors or lodge a formal complaint through the company (depending on the size of the organisation). If it is a serious allegation you may need someone to represent you from a legal standpoint. Look up the workplace laws that apply to you and seek appropriate advice.

Go to device manager and see if it shows up there. Also try different USB slots.

I have 2 sites that may have a manual. https://www.manualslib.com/ http://www.manualsonline.com/

unplug the spk from amp an power up back check speaker wiring and signal setting on head unitand amp..

Your wiring is as follow's :

The Red wire is your (+) Positive that connect's to the power source
The Black wire is your (-) Negative that connect's to the ground
The Orange wire is your Auxillary (+) that turn's on Amplifier's or Power Ant.

You should have a Green wire, a Green wire with a White stripe,a Gray wire, and a Gray wire with White stripe

The Green wire is the LEFT channel input (+)
The Green/White wire is the LEFT channel input (-)
The Gray wire is the RIGHT channel input (+)
The Gray/White wire is the RIGHT channe (-)

(BE SURE THAT YOU CONNECT THE RED (+) AND BLACK(-) WIRES BEFORE YOU CONNECT THE ORANGE WIRE TO AN AUX SOURCE OR YOU WILL BLOW THE INTERNAL FUSE !!!)


PS. I have no idea where that White wire you mentioned goes.

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 yearsmust try this bitman and reliable-store. Both are good

notify friend or boss for owners manual

How to install it